T244 Instruction Manual
4Modernhome
Product Overview
To better protect the lampshade from damage during transportation, it arrives rolled, and you may notice wrinkles or creases on the edges when you first put it up. Do not be alarmed; this is not a permanent issue or defect. Be prepared for the possibility that it may take several days or weeks for the lampshade to regain its natural shape.
First, assemble the shade by attaching the sides together using Velcro. Align the frame with the edge of the lampshades and secure it in place using fasteners. Repeat the process for the second frame. Ensure that the frames are firmly attached and the lampshades are tightly stretched.
Installation Guide
Dear Customer: Thank you for choosing 4modernhome! We appreciate your business. Should you have any questions or encounter any issues, please do not hesitate to contact us. You can reach us via email at support@4modernhome.com or by calling 469-312-6428. Our team is dedicated to ensuring your complete satisfaction with your purchase. We value your feedback, as it helps future customers in making informed decisions. We encourage you to share your experience by leaving a brief product review on the platform where you made the purchase. Additionally, you can scan the provided code for an installation video to assist you further. Once again, thank you for choosing 4modernhome!
Best regards,
4Modernhome Support Team
- Warning: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
- Warning: California Residents Proposition 65 This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
- Caution: It is highly recommended to get an electrician to install this light. Please ensure the electricity is turned off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass components and/or lamps.
Applicable bulb type: A19, A60, T45, ST58... (Bulb not included).
CAUTION: Risk of fire. Ensure proper electrical connection (Live 'L' and Neutral 'N').
Please read all instructions carefully. Before you proceed to install, ensure that the power supply is turned off and remains off until installation is completed.
- Unpack all parts from cartons carefully.
- During assembly, ensure the power cord is prevented from twisting.
- Stuff the cord into the lamp socket (B), then tighten the lamp socket (B) into the body (A) until tight.
- Place the harp (C) onto the lamp socket (B) and the lamp base sockets.
- Place the shade (D) onto the harp (C).
- Tighten the finial (E) into the harp (C) until tight. If the lampshade is slanted, adjust the base of the finial to make it level.
A QR code is provided for an installation video. Scan it for further assistance.
Parts Included
| Code | Part Description | QTY |
|---|---|---|
| A | Body | 1 |
| B | Lamp socket | 1 |
| C | Harp | 1 |
| D | Shade | 1 |
| E | Finial | 1 |
