F265 Instruction Manual
Brand: 4MODERN HOME
Manufactured in: CHINA
Customer Welcome and Support
Dear Customer,
Thank you for choosing 4modernhome! We appreciate your business. Should you have any questions or encounter any issues, please don't hesitate to contact us. You can reach us via email at support@4modernhome.com or by calling 469-312-6428. Our team is dedicated to ensuring your complete satisfaction with your purchase. We value your feedback, as it helps future customers in making informed decisions. We encourage you to share your experience by leaving a brief product review on the platform where you made the purchase. Once again, thank you for choosing 4modernhome!
Best regards,
[4Modernhome/Support Team]
Product Information
Applicable bulb type: A19, A60, T45, ST58... (Excluding bulb)
Safety Precautions
CAUTION: Risk of fire [fire-symbol]
Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.
Warning: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
Warning: California Residents Proposition 65 This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Caution: It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass component(s) and/or lamp(s).
Parts Included
| Code | Part Description | QTY |
|---|---|---|
| A | Base | 1 |
| B | Tube | 1 |
| C | Tube | 1 |
| D | Tube | 1 |
| E | Tube | 1 |
Assembly Instructions
- Unpack all parts from carton carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Tighten the tube(B) into the base(A) until tight.
- Tighten the tube(C) into the tube(B) until tight.
- Tighten the tube(D) into the tube(C) until tight.
- Tighten the tube(E) into the tube(D) until tight.
Diagram Description
The diagram illustrates the assembly of a floor lamp. It shows a base component labeled 'A'. A series of tube components, labeled 'B', 'C', 'D', and 'E', are stacked vertically and connected sequentially. Tube 'B' attaches to the base 'A', followed by 'C' to 'B', 'D' to 'C', and 'E' to 'D'. The diagram also indicates the power cord management from the base, with labels 'L' and 'N' likely representing live and neutral connections for electrical safety.
