F215 Instruction Manual
Brand: 4MODERNHOME
Welcome & Support
Dear Customer, Thank you for choosing 4modernhome! We appreciate your business. Should you have any questions or encounter any issues, please don't hesitate to contact us. You can reach us via email at support@4modernhome.com or by calling 469-312-6428. Our team is dedicated to ensuring your complete satisfaction with your purchase. We value your feedback, as it helps future customers in making informed decisions. We encourage you to share your experience by leaving a brief product review on the platform where you made the purchase. Once again, thank you for choosing 4modernhome!
Best regards,
[4Modernhome/Support Team]
Safety Information & Warnings
CAUTION: Risk of fire ⚠️
Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.
Warning: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
Warning: California Residents Proposition 65
This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Caution: It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass component(s) and/or lamp(s).
Parts Included
| Code | Part Description | QTY |
|---|---|---|
| A | Lamp socket | 1 |
| B | Center column | 1 |
| C | Tubes (C, C1,C2) | 3 |
| D | Tubes(D, D1,D2) | 3 |
| E | Tubes(E,E1,E2) | 3 |
| F | Saddle | 1 |
| G | Harp | 1 |
| H | Shade | 1 |
| I | Final | 1 |
Assembly Instructions
Applicable bulb type: A19, A60, T45, ST58... (Excluding bulb)
Diagram Description: The diagram illustrates the assembly of a lamp. It shows various components labeled A through I, connected in a specific order to form the lamp structure. Key parts include a lamp socket (A), a center column (B), multiple tubes (C, C1, C2), a second set of tubes (D, D1, D2), a third set of tubes (E, E1, E2), a saddle (F), a harp (G), a shade (H), and a final decorative piece (I). The assembly steps detail how these parts connect sequentially to form the complete lamp.
- Unpack all parts from cartons carefully.
- Tighten the Lamp socket (A) into the Center column (B) until tight.
- Tighten Center column (B) into the tubes (C, C1, C2) until tight.
- Tighten the tubes (C, C1, C2) into the tubes (D, D1, D2) until tight.
- Tighten the tubes (D, D1, D2) into the tube (E, E1, E2) until tight.
- Place the Harp (G) into Saddle (F) until tight.
- Place the Shade (H) into the Harp (G).
- Tighten the Final (I) into the Harp (G) until tight.
MADE IN CHINA
