4ModernHome T267 Lamp Instruction Manual
Product Model: T267
Brand: 4ModernHome
Manufactured in: China
Welcome
Dear Customer,
Thank you for choosing 4ModernHome! We appreciate your business. Should you have any questions or encounter any issues, please don't hesitate to contact us. You can reach us via email at support@4modernhome.com or by calling 469-312-6428. Our team is dedicated to ensuring your complete satisfaction with your purchase. We value your feedback, as it helps future customers in making informed decisions. We encourage you to share your experience by leaving a brief product review on the platform where you made the purchase. Once again, thank you for choosing 4ModernHome!
Best regards,
[4ModernHome/Support Team]
Specifications
Applicable bulb type: A19, A60, T45, ST58 (Excluding bulb)
Diagram Description: The lamp consists of three main parts: (A) Body, (B) Lamp socket, and (C) Shade. The power cord exits from the base of the lamp body.
Safety Information & Cautions
⚠️ CAUTION: Risk of fire
Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.
General Warnings:
- If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electrical contractor.
- California Residents Proposition 65: This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Installation Cautions:
- It is highly recommended to get an electrician to install this light.
- Please ensure the electricity is turned off at the main circuit breaker before beginning installation.
- All glass is fragile. Use care when handling glass component(s) and/or lamp(s).
Parts Included
Code | Part Description | QTY |
---|---|---|
A | Body | 1 |
B | Lamp socket | 1 |
C | Shade | 1 |
Assembly Instructions
- Unpack all parts from cartons carefully.
- Carefully pull out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Tighten the lamp socket (B) into the body (A) until tight.
- Place the shade (C) onto the lamp socket (B).