Yaheetech 611805(TWIN) Bed Frame Assembly Instructions

Important Information

• Assembly Recommendation: 2 or more people are recommended for assembly.
• Estimated Assembly Time: 1 hour.
• Safety Warnings:
• Not intended for use by children.
• Keep away from fire or other heat sources.
• Protective gloves are recommended during assembly.

Please read this instruction manual carefully before attempting to install.

Follow the instruction manuals and use a pad to avoid damage during assembly.

Parts List

The following parts are included in the package:

1. (x2)
2. (x2)
3. (x2)
4. (x2)
5. (x2)
6. (x2)
7. (x1)
8. (x1)
9. (x1)
10. (x8)
11. (x2)
12. (x2)
13. (x2)
14. (x2)
15. (x2)
16. (x4) - Decorative Tops
17. (A) (x4) - M8x65mm Bolts
18. (B) (x16) - M6x50mm Bolts
19. (C) (x12) - M6x35mm Bolts
20. (D) (x10) - M6x15mm Bolts
21. (E) (x20) - Washers
22. (F) (x4) - Nuts
23. (G) (x4) - Small Blocks
24. (H) (x1) - Allen Wrench
25. (I) (x1) - Connecting Piece

Assembly Steps

Step 1

Attach part 1 (x2) to part 8 (x1) using bolts A (x4) and washers E (x4). Half-tighten screws first, then fully tighten once all screws are in place.

Visual Description: Two long poles (1) are connected to a central horizontal piece (8) using bolts and washers.

Step 2

Attach part 2 (x2) to part 9 (x1) using bolts B (x4) and washers E (x4). Half-tighten screws first, then fully tighten.

Visual Description: Two shorter poles (2) are connected to a ladder-like structure (9) using bolts and washers.

Step 3

Connect parts 4 (x2), 5 (x2), and 6 (x2) using bolts D (x4) and nuts F (x4). Then, attach part 6 (x2) to part 4 (x2) using bolts F (x4) and washers D (x4). Ensure 35mm and 15mm measurements are followed as indicated.

Visual Description: This step involves assembling smaller frame components using various bolts and nuts, with specific length requirements shown.

Step 4

Attach the assembled frame sections from Step 3 to the main bed structure using bolts A (x4), washers E (x4), and blocks G (x4). Ensure 65mm measurements are followed.

Visual Description: The previously assembled smaller parts are attached to the main bed frame using bolts, washers, and blocks.

Step 5

Attach parts 3 (x2) and 7 (x1) to the bed frame using bolts C (x8). Half-tighten screws first, then fully tighten.

Visual Description: Two headboard/footboard components (3) and a central support (7) are attached to the frame using bolts.

Step 6

Insert part 10 (x8) into the designated slots on the bed frame.

Visual Description: Eight slats (10) are placed across the bed frame to form the mattress support.

Step 7

Attach the corner canopy poles (11, 12, 13, 14, 15) and decorative tops (16) using bolts B (x4), D (x4), and E (x4) as shown in the diagrams.

Visual Description: The four vertical canopy poles are attached to the corners of the bed frame, with decorative tops added. Specific connection points and hardware are illustrated.

Step 8

Complete the canopy structure by connecting the remaining poles (13, 14) using bolts B (x4) and washers E (x4). Ensure 50mm measurements are followed.

Visual Description: The top horizontal bars of the canopy are attached to the vertical poles, secured with bolts and washers.

Customer Support

If you are not entirely satisfied with your purchase, please feel free to contact Yaheetech customer support using the following steps:

1. Go to Your Orders.
2. Find your order in the list.
3. Select Problem with order.
4. Choose your topic from the list displayed.
5. Select Contact seller.

You can also download the electronic Installation Manual from the Product guides and documents section of the advertising page.