Yaheetech Bed Frame Assembly Instructions
Important Information
Assembly Recommendations:
- People Required: 2 or more people recommended for installation.
- Estimated Assembly Time: 1 hour.
- Safety Warnings:
- Not intended for use by children.
- Keep away from fire or other heat sources.
- We recommend wearing protective gloves during assembly.
Assembly Tips: Please follow the instruction manuals and use a pad to avoid damage during assembly. This will protect the product and the floor.
Parts List
The following parts are included in the package:
| Identifier | Description | Quantity |
|---|---|---|
| A | Side Rail | 1 |
| B | Side Rail | 1 |
| C | Slats Support | 4 |
| C1 | Slats Support | 2 |
| C2 | Slats Support | 2 |
| D | Center Support Rail | 2 |
| E | Headboard Support | 1 |
| E1 | Headboard Support | 1 |
| F | Footboard Support | 1 |
| G | Long Support Bar | 10 |
| H | Leg Support | 2 |
| I | Cross Support | 1 |
| J | Cross Support | 2 |
| K | Support Connector | 4 |
| L | Headboard Frame | 1 |
| M | Headboard Frame | 2 |
| N | Headboard Panel | 1 |
| O | Footboard Frame | 2 |
| P | Footboard Frame | 1 |
| Q | Footboard Frame | 2 |
| 1 | Screw | 6 |
| 2 | Screw | 22 |
| 3 | Screw | 12 |
| 4 | Screw | 8 |
| 5 | Screw | 11 |
| 6 | Washer | 14 |
| 7 | Allen Wrench | 1 |
Assembly Steps
Step 1: Attach support connectors (K) to the headboard frame parts (M). Insert screws (not specified in this step, likely part of K's packaging) and tighten lightly.
Step 2: Connect the headboard frame parts (M) and (N) to the side rails (A and B) using screws (5) and washers (6). Do not fully tighten screws yet.
Step 3: Assemble the main bed frame. Attach side rails (A, B) to the headboard (L, M, N) and footboard (O, P, Q) components using screws (1, 6) and (2, 5). Ensure the center support rails (D) and cross supports (J) are positioned correctly. Attach the slats supports (C, C1, C2) to the side rails. Lightly tighten all screws.
Step 4: Attach the leg supports (H) to the center support rails (D) using screws (5). Ensure the orientation of part (H) is correct.
Step 5: Attach the footboard frame parts (P, Q) to the side rails (A, B) using screws (5). Ensure the orientation of part (P) is correct.
Step 6: Attach the headboard frame parts (M) to the side rails (A, B) using screws (4) and washers (6). Do not fully tighten screws at this stage.
Step 7: Attach the center support rails (D) and cross supports (J) to the frame using screws (3) and (5). Ensure the orientation of parts (E, E1, F, I) is correct.
Step 8: Attach the footboard frame parts (B) to the side rails (A, B) using screws (5). Ensure the orientation of part (B) is correct.
Step 9: Connect the center support rails (D) and cross supports (J) to the frame using screws (1) and (3). Ensure the orientation of parts (E) is correct.
Step 10: Attach the long support bars (G) to the slats supports (C) using screws (G x10). Tighten all screws completely after assembly.
Step 11: Secure the slats supports (C) to the side rails (A, B) using screws (2) and washers (6). Lightly tighten all screws.
Customer Support
If you are not entirely satisfied with your purchase, please contact Yaheetech customer support by following these steps:
- Go to Your Orders.
- Find your order in the list.
- Select "Problem with order".
- Choose your topic from the displayed list.
- Select "Contact seller".
You can also download the electronic Installation Manual from the "Product guides and documents" section of the advertising page.
