Tribesigns Assembly Instructions
For Coffee Table
Model No.: HOGA-XK00515 / XK00730, HOGA-XK00766
Brand: Little Tree by Tribesigns
Website: www.tribesigns.com
Contact Us
We're here to help you.
Email: support@tribesigns.com
Phone: 1-424-220-6888
Contact hours: 7 AM to 8 PM EST, Monday to Friday.
Your satisfaction is our top priority. If you encounter any issues with this product, such as missing or damaged parts, please retain the original packaging and take photos of the packaging and the product, then contact us as soon as possible.
Warm Tips
- Carefully read these instructions and keep them for future reference.
- Check the parts list and confirm everything's there before starting assembly.
- When assembling, put all parts on a soft, smooth surface like a carpet to avoid scratches.
- Don't fully tighten screws until all parts are confirmed in place to avoid misalignment.
How to Get the Assembly Video
Step 1: Scan the provided QR code to access the installation video.
Step 2: Alternatively, search for the Model No. (e.g., HOGA-XK00515) on YouTube.
Note: If you can't find the assembly video, please contact us.
Assembly Recommendations
We recommend using hand tools for assembly. If an electric screwdriver is used, reduce power and torque to avoid damage to the product. [Hand Tools & Screwdriver Illustration]
AVOID SCRATCHES
In order to avoid scratching this furniture, it should be assembled on a soft layer, such as a rug. [Scratch Prevention Diagram]
Incorrect: ❌ Damaged parts illustration.
Correct: ✔️ Assembly on a rug illustration.
Parts Identification
Caution: Make sure all parts are included. Most board parts are labeled or stamped on the raw edge. Contact us for a free replacement if you encounter any damaged or missing parts. [Caution Symbol ⚠️]
The main components are:
- Part 1: Side panel with vertical slats (2 pcs)
- Part 2: Side panel with vertical slats (2 pcs)
- Part 3: Tabletop (1 pc)
Parts List
| Part | Description | Quantity |
|---|---|---|
| 1 | Side panel with vertical slats | 2 pcs |
| 2 | Side panel with vertical slats | 2 pcs |
| 3 | Tabletop | 1 pc |
Hardware List
| Label | Description | Quantity |
|---|---|---|
| A | Screw M6x35mm | 16 pcs |
| A | Cam Lock Ø15x12mm | 16 pcs (used across multiple steps) |
| B | Cam Lock | 8 pcs |
Note: A screwdriver is required for assembly but is not listed as hardware.
Assembly Steps
Step 1: Install Pins and Cams
Screw the pins into the designated holes. Set the cams correctly by aligning the head of the cams with the lock pins. Lock the cam by turning the cam head with a screwdriver until it is tightened. Please do not use an electric screwdriver to assemble the unit. [Illustration of pin and cam installation]
Detailed illustration shows pin insertion, cam placement, and tightening with a screwdriver. Ensure no gap is visible after tightening.
Step 2: Assemble Base Structure
Take one base panel (labeled 1). Attach two side panels (one labeled 1, one labeled 2) to the base panel using 8 pieces of hardware A (M6x35mm screws). This forms a U-shape. [Diagram showing parts 1 and 2 being attached to a base panel]
Illustration shows a base panel (labeled 1) with two side panels (labeled 1 and 2) attached vertically using screws (labeled A).
Step 3: Complete the Box Frame
Attach the remaining two side panels (one labeled 1, one labeled 2) to the structure. Use 4 pieces of hardware A (Cam Locks Ø15x12mm) to connect these panels to the base and each other, forming a box. [Diagram showing box formation]
Illustration shows the remaining side panels being connected to form a box, secured with cam locks (labeled A).
Step 4: Attach Tabletop
Place the tabletop (part 3) onto the assembled box structure. Secure it using 8 pieces of hardware A (M6x35mm screws). [Diagram showing tabletop attachment]
Illustration shows the tabletop (labeled 3) being placed on top of the assembled side panels and secured with screws (labeled A).
Step 5: Secure Side Panels
Secure the side panels to the tabletop. Use 8 pieces of hardware A (Cam Locks Ø15x12mm) to fasten the side panels to the underside of the tabletop. [Diagram showing final side panel attachment]
Illustration shows the side panels being attached to the underside of the tabletop, secured with cam locks (labeled A).
Step 6: Final Securing
Secure the entire unit by using 8 pieces of hardware B (Cam Locks). Caution! Tap lightly when securing. [Diagram showing final securing]
Illustration shows the final cam locks (labeled B) being inserted and secured, with a note to tap lightly.
