SMÅGÖRA Shelf Unit
Assembly Instructions
Important Safety Information
⚠️ WARNING!
Children have died from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided. The screw(s) and plug(s) supplied can be used with most solid and hollow walls. For solid wood use the screw(s) without plug(s). Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
Tools Required
- ? Phillips head screwdriver
- ? Flat head screwdriver
- ✏️ Pencil
- ? Spirit level
- ? Hammer
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| 118331 | Shelf support pin | 16x |
| 101345 | Screw / Dowel | 16x (screws) + 8x (dowels) |
| 119252 | Cam lock | 16x |
| 122628 | Foot / Base cover | 4x |
| 107716 | Wall mounting bracket (part 1 of 2) | 2x |
| 115753 | Wall mounting bracket (part 2 of 2) | 2x |
| 110646 | Circular base piece for wall mount | 2x |
| 103693 | Wall mounting clip | 2x |
| 115754 | Side panel | 2x |
| [Back panel] | Back panel | 1x |
| [Base panel] | Base panel | 1x |
| [Top panel] | Top panel | 1x |
| [Internal dividers] | Internal vertical dividers | 3x |
| [Shelves] | Shelves | 3x |
Note: Some parts are identified by diagrams and context rather than explicit labels in the provided images.
Assembly Instructions
Step 1: Prepare Side Panels
Insert 16 shelf support pins (part 118331) into the pre-drilled holes on the inner surfaces of the two main vertical side panels (part 115754).
Step 2: Attach Base Panel
Attach the base panel to the bottom edges of the two main vertical side panels using 8 screws (part 101345).
Step 3: Attach Vertical Dividers
Insert dowels (part 101345) into the top edges of the main vertical side panels. Attach the three internal vertical dividers to the base panel using 8 screws (part 101345).
Step 4: Secure with Cam Locks
Insert 8 cam locks (part 119252) into the designated holes on the internal vertical dividers and the base panel. Turn the cam locks clockwise [turn] to secure the structure.
Step 5: Install Back Panel
Slide the back panel into the grooves along the rear edges of the assembled frame.
Step 6: Place Shelves
Place the three shelves onto the shelf support pins (part 118331) that were inserted in Step 1.
Step 7: Attach Top Panel
Insert 8 cam locks (part 119252) into the top panel. Position the top panel onto the unit and turn the cam locks clockwise [turn] to secure it.
Step 8: Attach Feet
Attach the 4 feet/base covers (part 122628) to the bottom corners of the unit. These may require gentle tapping with a hammer [hammer].
Step 9: Install Wall Mounting Brackets on Unit
Attach the two wall mounting bracket assemblies (parts 107716 and 115753) to the top rear of the unit using the provided screws.
Step 10: Attach Circular Mount Pieces
Attach the two circular base pieces (part 110646) to the wall mounting bracket assemblies.
Step 11: Install Wall Mounting Clips
Secure the two wall mounting clips (part 103693) to the wall at the desired height. Ensure they are level [level]. Use appropriate wall fixings (not included) suitable for your wall type.
Step 12: Mount Unit to Wall
Carefully lift the assembled unit and hang it onto the wall mounting clips. Ensure it is securely attached.
Important Safety Reminder
⚠️ Always use the provided wall attachment devices to prevent furniture tip-over. Ensure fixings are suitable for your wall type. Seek professional advice if unsure.
