KALLAX Shelf Unit

Important Safety Information

⚠️ WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.

Screws(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.

This warning is provided in multiple languages throughout the document.

Tools Required

The following tools may be needed for assembly:

• Screwdriver (Note: A specific type may be shown with a cross ❌ indicating it is not included or not suitable for a particular step)
• Pencil
• Hammer
• Spirit Level

Assembly may require two people. Assistance from a professional or consultation with IKEA may be sought if unsure.

Parts and Hardware List

Assembly Steps

Step 1: Prepare Base and Side Panels

Attach the wall attachment bracket (121030) to the base panel using screws (100092) with the hex key. Then, insert long screws (104322) into the bracket. An inset shows the bracket (121030) with screw (100092) being inserted. An information icon (ⓘ) is present.

Step 2: Insert Dowels into Side Panel

Insert dowels (101339) into the pre-drilled holes on one of the long side panels using a hammer. An inset shows dowel (101339) and a rejected dowel (101345) marked with a cross [❌].

Step 3: Insert Dowels into Other Side Panel

Insert dowels (101345) into the pre-drilled holes on the other long side panel using a hammer. An inset shows dowel (101345) and a rejected dowel (101339) marked with a cross [❌].

Step 4: Attach First Vertical Divider

Attach a vertical divider panel by aligning it with the dowels on the side panel. An arrow indicates the insertion direction. An inset shows dowel (101339) and rejected dowel (101345) marked with a cross [❌].

Step 5: Insert Dowels into Horizontal Shelves

Insert dowels (101345) into the pre-drilled holes on the horizontal shelf panels using a hammer. An inset shows dowel (101345) and rejected dowel (101339) marked with a cross [❌].

Step 6: Attach First Horizontal Shelf

Attach a horizontal shelf panel by aligning it with the dowels. An arrow indicates the insertion direction.

Step 7: Attach Second Vertical Divider

Attach another vertical divider panel by aligning it with the dowels. An arrow indicates the insertion direction. An inset shows dowel (101339) and rejected dowel (101345) marked with a cross [❌].

Step 8: Attach Third Vertical Divider

Attach another vertical divider panel by aligning it with the dowels. An arrow indicates the insertion direction.

Step 9: Attach Second Horizontal Shelf

Attach another horizontal shelf panel by aligning it with the dowels. An arrow indicates the insertion direction. An inset shows dowel (101345) and rejected dowel (101339) marked with a cross [❌].

Step 10: Attach Third Horizontal Shelf

Attach another horizontal shelf panel by aligning it with the dowels. An arrow indicates the insertion direction. An inset shows dowel (101339) and rejected dowel (101345) marked with a cross [❌].

Step 11: Insert Dowels into Top Panel

Insert dowels (101339) into the pre-drilled holes on the top panel using a hammer. An inset shows dowel (101339) and rejected dowel (101345) marked with a cross [❌].

Step 12: Attach Top Panel

Attach the top panel. The wall attachment bracket (121030) is secured to the top panel with screws (100092) using the hex key. Long screws (104322) are then inserted into the bracket. An arrow indicates the insertion direction.

Step 13: Attach Back Panels

Secure the back panels using screws (104332).

Step 14: Attach Decorative Elements

Attach the hexagonal decorative elements (10002300) to the base of the unit. An arrow indicates the insertion direction.

Step 15: Attach Wall Mounting Brackets to Unit

Attach the wall mounting brackets (115753) to the top of the shelf unit using screws (100372). A warning icon (⚠️) is present, indicating the importance of this step for stability.

Step 16: Level the Unit

Use a spirit level on top of the unit to ensure it is perfectly level before proceeding with wall mounting.

Step 17: Mark Wall for Mounting

Mark the wall at the desired height for the unit's wall mounting points. An inset shows screws being inserted into the wall, with an option for wall plugs, one type shown with a cross [❌] indicating it may not be suitable.

Step 18: Secure Unit to Wall

Attach the wall hook/clip (103693) to the unit. Slide the unit into its final position. Secure the unit to the wall using the wall attachment hardware (118225) which connects to the wall brackets.

Final Check

Ensure all connections are secure and the unit is stable. The unit must be securely fastened to the wall to prevent tipping.

Product Information

Product Name: KALLAX Shelf Unit

Brand: IKEA

Manufacturer: IKEA of Sweden

Article Number: AA-2404217-4