BRIMNES Headboard Assembly Instructions
Safety Information
⚠️ WARNING!
Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.
Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
(Note: This warning is presented in multiple languages in the original document, but only the English version is detailed here as per primary language requirement.)
Parts and Hardware
The following hardware components are required for assembly:
- 6x Dowels (Part #110115)
- 28x Cam Lock Screws (Part #118331)
- 12x Wooden Dowels (Part #101356)
- 26x Cam Locks (Part #101345)
- 40x Screws (Part #119253)
- 4x Screws (Part #118137)
- 8x Screws (Part #100349)
- 2x End Caps/Covers (Part #122628)
- 2x Wall Brackets (Part #103693)
- 2x Wall Brackets (Part #115753)
- 2x Wall Brackets (Part #115754, 118225, 121184)
(Note: The original document includes a critical safety warning about wall attachment, illustrated with diagrams showing a unit tipping over if not secured.)
Assembly Steps
Step 1
Insert 3 dowels (Part #110115) into the pre-drilled holes on the long side panels.
Step 2
Insert 3 wooden dowels (Part #101356) into the corresponding holes on the panels.
Step 3
Attach the panels by inserting cam lock screws (Part #118331) and then securing them with cam locks (Part #101345).
Step 4
Slide the assembled panels together, ensuring a snug fit.
Step 5
Insert 3 dowels (Part #110115) into the pre-drilled holes on the long side panels.
Step 6
Insert 3 wooden dowels (Part #101356) into the corresponding holes on the panels.
Step 7
Connect the panels using cam lock screws (Part #119253, Part #118137) and secure with cam locks (Part #101345).
Step 8
Screw in 10 cam lock screws (Part #118331) into the designated holes.
Step 9
Attach the panels using 4 screws (Part #118331).
Step 10
Attach the vertical divider panels using 4 screws (Part #101345).
Step 11
Connect the panels using 4 cam lock screws (Part #118331) and secure with cam locks (Part #119253, Part #118137).
Step 12
Screw in 8 cam lock screws (Part #118331) into the designated holes.
Step 13
Attach the panels using 10 dowels (Part #101345).
Step 14
Connect the panels using 8 cam lock screws (Part #119253, Part #118137) and cam locks.
Step 15
Attach the horizontal storage box components using 8 wooden dowels (Part #101345).
Step 16
Attach the remaining horizontal storage box components using 2 wooden dowels (Part #101345).
Step 17
Connect the panels using 10 cam lock screws (Part #119253, Part #118137) and cam locks.
Step 18
Attach the panels using 2 screws (Part #100349).
Step 19
Gently tap 2 end caps/covers (Part #122628) into place using a hammer.
Step 20
Attach the wall brackets (Part #103693) to the assembled headboard unit.
Step 21
Attach the other set of wall brackets (Part #115753, Part #115754, 118225, 121184) to the assembled headboard unit.
Step 22
Screw in 6 cam lock screws (Part #118331) into the designated holes.
Step 23
Attach the panels using 2 wooden dowels (Part #101345).
Step 24
Connect the panels using 6 cam lock screws (Part #119253, Part #118137) and cam locks.
Step 25
Attach the panels using 8 screws (Part #101532).
Step 26
Slide the final panels into their designated slots.
Final Safety Note
Ensure the furniture is securely attached to the wall using appropriate hardware for your wall type to prevent tipping hazards. Refer to the initial safety warnings.
