Honeywell DT8050AF24-SN V-Plex DUAL TEC Motion Sensor with Anti-Mask - Quick Installation Guide

Installation Overview

This guide provides instructions for the Honeywell DT8050AF24-SN V-Plex DUAL TEC Motion Sensor with Anti-Mask.

Key Features:

V-Plex® DUAL TEC® technology
Anti-Mask functionality
Quick Installation Guide

Mounting and Placement

Diagram 1: Illustrates recommended mounting locations for the sensor, emphasizing keeping the area clear in front of the sensor (at least 30 cm / 12 inches).

Diagram 2: Shows the internal components and wiring connections for the sensor.

Diagram 3: Details the mounting procedure using screws (#6 x 1" / 3.5 mm x 25 mm) and shows how to attach the sensor to a wall or ceiling bracket.

Diagram 4: Explains the sensor's settings, including 'Look-Down Disabled'/'Enabled' and 'Anti-mask Enabled'/'Disabled'. It also shows the adjustment for Microwave Range and Sensitivity.

Wiring and Power

Diagram 5: Shows the wiring for a Polling Loop, 9-13V PK-PK connection, with a note about keeping the sensor clear of masking or reflective material.

Operation and Walk Test

Diagram 6: Details the walk test procedure. It explains how to apply power, initialize the sensor (LED stops flashing), reduce microwave range if necessary, and walk through the detection area to observe the LED.

LED Indicators: A table explains the LED behavior during Power Up, Walk Test, Normal, Trouble, and Anti-Mask modes for Red, Yellow, and Green LEDs.

Walk Test Mode: The walk test mode is active for 10 minutes and automatically exits. It can be re-enabled using a flashlight feature for an additional 10 minutes.

Zone Coverage Diagram

Diagram 7: Provides a visual representation of the sensor's detection zones (A, B, C, D) and their corresponding coverage distances in meters and feet. It includes top and side views of the coverage pattern.

Zone A (2): Look-down / Basses / Vista Zona 0 / Vigilância inferior
Zone B (12): Lower / Courtes / Cercana / Mais baixas
Zone C (10): Intermediate / Intermédiaires / Intermedia / Intermédias
Zone D (36): Long / Longues / Largo Alcance / Longo alcance

Troubleshooting

A troubleshooting section provides guidance on common issues, including:

Masking: Sensor IR window is blocked or masked.
Self-Test Failure: Microwave supervision failure, PIR self-test failure, or temperature compensation failure.

Corrective actions include verifying the sensor is not blocked, cycling power, performing a walk test, and replacing the sensor if the issue persists.

Specifications

Electrical Ratings: 9.5 - 15VDC, Max. 25 mA at 9.5VDC; Max. 16 mA at 15 VDC.
Operating Temperature: 14° to 131 °F (-10° to 55°C)
Relative Humidity: 5 to 93% (non-condensing)

Approvals and Listings

FCC part 15, Class B verified
IC ICES-003, Class B verified
UL 639
ULC S306-03

Compliance and Safety Information

Federal Communications Commission (FCC) Statements: Includes information on FCC requirements for Class B digital devices and potential interference.

Industry Canada Class B Statement: Compliance with Canadian ICES-003.

FCC Supplier's Declaration of Conformity: Details the responsible party (Honeywell International Inc.) and compliance with FCC Part 15 rules.

RF Exposure Warning: Advises on maintaining a minimum separation distance of 20 cm (7.8 inches) from the radiator to all persons.

General Installation Notes: All wiring must comply with National Electrical Code, Canadian Electrical Code, UL standards, and local codes. Products are intended to be powered by a power-limited output of a UL/CUL Listed Burglar Alarm control unit or a Listed UL2610/UL603/ULC-S318 power supply.

UL Notes: All interconnecting devices must be UL Listed. The anti-mask feature has not been evaluated by UL.

For patent information, visit: www.honeywell.com/patents

For the latest documentation and online support, visit: https://buildings.honeywell.com/us/en/products/by-category/sensors/motion-detectors/dual-tec-24g-motion-sensor and https://myhoneywellbuildingsuniversity.com/training/

For warranty information, contact your local authorized Honeywell representative or visit: www.honeywell.com/security/hsc/resources/wa

Contact Information:

Honeywell Building Automation
Commercial Security
715 Peachtree St NE
Atlanta, GA 30308-2179
1.800.323.4576

	Honeywell End-of-Life Notification for Dual Tec Motion Sensor SKUs This Honeywell Marketing Bulletin announces the immediate end-of-life for select Dual Tec® intrusion detection motion sensor SKUs, with no direct replacements available.
	Honeywell V-Plex Motion Sensors: Advanced PIR and DUAL TEC Detection Explore Honeywell V-Plex Motion Sensors, including IS3016A-SN, DT8016AF5-SN, and DT8320AF5-SN models. Featuring patented polling loop technology, superior detection, and fast installation for enhanced security systems.
	Honeywell V-Plex Bewegingsmelders: Geavanceerde PIR en Dual Tec Sensoren Ontdek de Honeywell V-Plex PIR en Dual Tec bewegingsmelders, ontworpen voor eenvoudige installatie, superieure detectie en minimale valse alarmen. Compatibel met Honeywell centrales, deze sensoren bieden geavanceerde technologie voor betrouwbare beveiliging.
	Honeywell V-Plex Motion Sensors: Advanced PIR and Dual Tec Detection Discover Honeywell V-Plex motion sensors, featuring advanced PIR and Dual Tec technology for superior detection, reduced false alarms, and simplified installation. Explore models like IS3016A-SN, DT8016AF4-SN, and DT8320AF4-SN with detailed technical specifications and flexible mounting options for robust security solutions.
	Honeywell DUAL TEC® Motion Sensor with Anti-Mask Installation Guide Discover the Honeywell DT8016AF4 and DT8016AF5 DUAL TEC® Motion Sensors with Anti-Mask, offering advanced security features for professional installations. This guide covers installation, wiring, EOL settings, walk testing, and coverage patterns for optimal performance and compliance with EN50131-2-4 standards.
	Honeywell DT8016AF4/DT8016AF5 DUAL TEC Motion Sensor Installation and Operation Guide Comprehensive guide for installing and operating the Honeywell DT8016AF4 and DT8016AF5 DUAL TEC Motion Sensors, featuring anti-mask technology. Includes wiring diagrams, sensitivity adjustments, and zone coverage details.
	Honeywell DT8016AF4 DT8016AF5 DUAL TEC Motion Sensor Installation Guide Comprehensive installation instructions for the Honeywell DT8016AF4 and DT8016AF5 DUAL TEC Motion Sensors with Anti-Mask technology, covering mounting, wiring, testing, and troubleshooting guidelines for optimal security system integration.
	Honeywell DT8016AF4 DUAL TEC Motion Sensor with Anti-Mask The Honeywell DT8016AF4 DUAL TEC® Motion Sensor with Anti-Mask provides reliable, high-security protection for commercial environments. Featuring patented DualCore™ signal processing, integrated EOL resistors, anti-mask technology, and X-Band microwave, it ensures superior false alarm immunity and extensive detection coverage. Ideal for EN Grade 3 installations, this sensor offers quick plug-in installation, walk test, mirror optics, and patented solutions for enhanced reliability and ease of use.