HPRT CP4100 Photo Printer

Product Introduction

This section provides an overview of the HPRT CP4100 Photo Printer and its accessories.

Printer Components:

• Paper Cassette
• Power Button
• Paper Inlet Cover
• Ribbon Cassette Compartment Cover
• Power Interface
• Power Indicator
• Connection Indicator
• Error Indicator

Accessories Included:

• Power Adapter*1
• Quick Start Guide*1
• Ribbon Cassette*1
• Photo Paper*20

Note: The printer is equipped with a ribbon and 2 packages of photo paper for testing, which can print approximately 20 photos.

Power On

1. Connect power supply: Plug one end of the power cord into the printer's power interface and the adapter into a power outlet.
2. Power on: Hold down the power button for 3 seconds to turn on the printer. The white power indicator will illuminate.

Ribbon Cassette Loading

1. Open the ribbon cassette compartment cover.
2. Insert the ribbon cassette: Take the ribbon cassette from the accessories box and insert it into the ribbon compartment following the direction of the arrow on the cassette. Ensure it clicks into place.
3. Close the ribbon cassette compartment cover.

Photo Paper Loading

1. Open the paper cassette: Gently lift and remove the paper cassette from above the printer. Pull out part 1 and flip it down, then lift part 2 cover upward.
2. Load photo paper: Take out the photo paper and load it into the paper cassette with the glossy side facing up.
3. Close the part 2 cover.

Note: It is recommended not to load more than 18 sheets of paper at a time. Avoid touching the glossy side of the paper to ensure print quality, except for the non-printable area.

Paper Cassette Loading

1. Open the paper inlet cover.
2. Load the paper cassette into the printer in the indicated direction.
3. Load the paper cassette into place: The paper cassette should slide about 2 cm into the slot and make a "click" sound to confirm it is in place.

Ribbon Cassette Replacing

1. Open the ribbon cassette compartment cover.
2. Flip the red button up. The ribbon cassette will pop up automatically. Remove the old ribbon.
3. Load the new ribbon cassette into place until a "click" sound is heard, then close the compartment cover.

CP4100 Photo Printer Specifications

• Product Name: Photo Printer
• Product Model: HCP-4TS23A
• Input: 24V, 2A
• Dimensions: 200*130*75 mm
• Weight: About 1.0 kg (without accessories)
• Operating Temperature: 5°C~35°C
• Wi-Fi Connection: Wi-Fi IEEE 802.11b/g/n 2.4 GHz
• Manufacturer: Xiamen Hanin Electronic Technology Co., Ltd.
• Address: No.96, Rongyuan Road, Tong'an District, Xiamen, China 361100
• Web: www.hprt.com
• Email: support@hprt.com

Power Button Operation

• Turn on the printer: Hold down the power button for 3 seconds. The white power indicator will turn on.
• Turn off the printer: Hold down the power button for 3 seconds. The power indicator will turn off.
• Reset printer network: With the printer turned on, hold down the power button for 6 seconds. The white connection indicator will flash quickly. Release the button to reset the printer network.

LED Indicator Definitions

Power Indicator

Connection Indicator

Error Indicator

Printing from Mobile Phone

1. APP Download: Scan the QR code to download the APP.
2. Connect to printer in AP mode:
   1. Open the APP, click "Add device", and "Connect" with "CP4100-XXXX" (XXXX are the last four digits of the Bluetooth address).
   2. Click "Connect to printer directly", follow the prompts on the APP to join and connect to the Wi-Fi released by the printer.
3. Connect to printer in STA mode:
   1. Connect the mobile phone to a Wi-Fi hotspot (must be 2.4 GHz).
   2. Open the APP, click "Add device", and "Connect" with "CP4100-XXXX" (XXXX are the last four digits of the Bluetooth address).
   3. Click "Connect the printer via Wi-Fi hotspot", enter the Wi-Fi password that your phone is connected to, then click "Connect".
4. Print:
   1. Click "Picture" on "Home", choose the photos you want to print and adjust them in Preview.
   2. Click "Print" to print.

Note: The print instructions above use "Picture" as an example. For "Collage", "ID photo", "AR video", "Templates", and other functions, please follow the prompts on the APP to experience.

Operating Environment

1. Please place the printer on a desktop or other flat and stable surface for use.
2. When printing, the photo paper will move back and forth. Ensure there is more than 10 cm of space behind the printer.

Precautions

1. The best operating temperature is 5°C~35°C. If the environmental temperature is too high, print quality may be affected.
2. Use the official adapter, ribbon, and photo paper to ensure print quality.
3. Do not touch the ribbon film or the glossy side of the photo paper to avoid contamination, which may affect print quality.
4. Do not forcibly pull out the photo paper during printing, as this may damage the printer.
5. When not in use for a long time, remove the paper cassette and close the covers of the cassette and printer to prevent dust accumulation.
6. Operating this device may cause radio interference in a residential environment.

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.

FCC ID: 2AUTE-4TS23A

FC CE ⛯

Tips

All drawings of products and accessories in this manual are for reference only. Due to product updates and upgrades, there may be some differences between the actual product and the drawings. Please refer to the actual product. For more product information, please contact HPRT customer service.