HPRT MT610 Mobile Printer

Product Introduction

This section provides an overview of the HPRT MT610 mobile printer, including its front and rear views, and accessories.

Front View:

• USB Interface
• Paper Inlet
• Cover-opening Button

Rear View:

• Power Button
• Operational Status LED
• Paper Outlet

Accessories:

• USB Cable x 1
• Separator

Install the Print Paper

1. Open the top cover: Pull the cover-opening button up and open the top cover.
2. Adjust Separator: Pull the Separator and adjust it according to the paper width.
3. Put in the printing paper: Place the thermal paper face up into the paper inlet. The paper will feed automatically.
4. Close the top cover: Ensure the top cover is securely closed.

Note: Please use HPRT official thermal paper for the best printing experience. The print side is the thermosensitive layer.

Power On

1. Power on: Press and hold the power button for 3 seconds to start the printer.

To turn off the printer, also press and hold the power button for 3 seconds.

Printing Wirelessly from Mobile Phone

1. Download App: Scan the QR code to download the HPRT App.
2. Connect with the printer: Turn on Bluetooth on your phone, open the App, tap "Connect printer", and select "MT610-xxxx" to connect.
3. Print: Open the document you wish to print, and copy/share it to the App. Alternatively, select document printing from the App's home page. Adjust in the print preview and tap the print icon in the top right corner.

Note: App operations are subject to the latest version.

Printing from PC

1. Connect one end of the USB cable to the PC and the other end to the printer.
2. Turn on the printer.
3. Download the printer driver from the official website: https://www.hprt.com/HPRT-MT610 and install it on your PC.
4. Choose the document you want to print from your PC and print it using the "HPRT MT610" printer.

Battery Charging

When the battery is low, the operational status LED will flash red quickly. Please use the matching USB cable to charge the printer promptly. Continued printing with a low battery may cause the printer to shut down automatically.

• Charging by PC: Connect the printer to a PC using the USB cable.
• Charging by power adapter: Connect the printer to a power adapter using the USB cable.

Precautions

• The optimal operating temperature is between 0°C and 40°C. Temperatures outside this range may affect print quality.
• Do not use unofficial paper rolls to ensure print quality.
• The printer head heats up during printing. Avoid touching it to prevent burns.
• Do not forcibly pull out the paper during printing, as this may damage the printer.

LED Indicator Definitions

1. Error Status

2. Printer Status

3. Connection Status

4. Charging Status

Product Parameters

• Product Name: Mobile Printer
• Product Model: MT610
• Battery Parameter: 7.4V, 2000mAh
• Dimensions: 266 x 55 x 47mm
• Weight: About 0.5kg (without accessories)
• Operating Temperature: 0°C~40°C

Note: Illustrations are for reference only. Actual product may differ slightly due to innovation and upgrades.

Safety Information

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2AUTE-8DT23J

Support and Resources

• Please scan the QR code to get 24h after-sales technical support service.
• Search "HPRT Official" on YouTube to get instruction videos. HPRT YouTube Website
• Search "HPRT Official" on Facebook to get extra consumables for the printer. HPRT Facebook Website