Yaheetech Cat Tree Assembly Instructions
Model: 611315
Important Information and Safety Precautions
Assembly Recommendation: ? 1 or more people recommended for assembly.
Estimated Assembly Time: ⏰ Approximately 1 hour.
Child Safety: ?❌ Not intended for use by children.
Fire Safety: ?❌ Keep away from fire or other heat sources.
Safety Gear: ? We recommend wearing protective gloves during assembly.
Assembly Environment: ✔️ Please follow the instruction manuals and use a protective pad or cover to avoid damage to the product and floors during assembly. ❌ Avoid improper handling.
Parts List
- Part 1: Platform (x2)
- Part 2: Platform (x1)
- Part 3: Top Platform (x1)
- Part 4: Platform (x1)
- Part 5: Condo Box (x1)
- Part 6: Small House (x1)
- Part 7: Ramp (x1)
- Part 8: Sisal-Covered Pole (40cm) (x4)
- Part 9: Sisal-Covered Pole (37cm) (x1)
- Part 10: Sisal-Covered Pole (33cm) (x2)
- Part 11: Plain Pole (40cm) (x4)
- Part 12: Plain Pole (33cm) (x1)
- Part 13: Plain Pole (27cm) (x4)
- Part 14: Hanging Toy (x1)
- Part 15: Spring Toy (x1)
- Hardware A: Screws (35mm) (x18)
- Hardware B: Screws (x7)
- Hardware C: Screws (25mm) (x2)
- Hardware D: Metal Plates (x2)
- Hardware E: Screws (x4)
- Hardware F: Allen Key (x1)
Assembly Steps
Step 1
Assemble the Small House (Part 6) by attaching four Plain Poles (Part 13) to its sides using eight Screws (Hardware A).
Step 2
Attach the Ramp (Part 7) to a Small Platform (Part 16). Secure it using two Metal Plates (Hardware D) and four Screws (Hardware E).
Step 3
Attach two Sisal-Covered Poles (Part 8) and two Plain Poles (Part 11) to two Platforms (Part 1). Use four Screws (Hardware A) for each platform.
Step 4
Connect the structure by attaching two Sisal-Covered Poles (Part 8) and two Plain Poles (Part 11) to the assembly from Step 3. Then, attach the assembled Ramp unit (Part 16 with Part 7) to the structure using four Screws (Hardware B).
Step 5
Attach the Top Platform (Part 3) to the structure. Use one Sisal-Covered Pole (Part 9), one Plain Pole (Part 12), and two Sisal-Covered Poles (Part 10) as supports. Secure the Top Platform using two Screws (Hardware A) and two Screws (Hardware B).
Step 6
Attach the Condo Box (Part 5) to the structure. Secure it using two Screws (Hardware C).
Step 7
Attach Platform (Part 4) to the structure, using the Sisal-Covered Pole (Part 9) as a support. Secure with one Screw (Hardware A) and one Screw (Hardware B).
Step 8
Attach the Condo Box (Part 5) to the structure. Use one Sisal-Covered Pole (Part 10) as a support and secure with three Screws (Hardware A).
Step 9
Attach the Hanging Toy (Part 14) to a pole and the Spring Toy (Part 15) to a platform as shown in the diagram.
Step 10
Perform final securing of any loose platforms or components using the Allen Key (Hardware F) and accompanying screws/washers.
Contact and Company Information
For assistance or further information, please contact Yaheetech customer service via email: ✉️ help@yaheetech.shop.
This product is manufactured in the People's Republic of China (PRC) for Yahee GmbH. Importer: Yahee GmbH, Hans-Grüninger-Weg 11, 71706 Markgröningen, Germany. Visit the official website at www.yaheetech.de.
A downloadable user manual is also available.
