Important Information
Please read this instruction manual carefully before attempting to install.
- ? We recommend 1 or more people to install.
- ⏱️ The expected assembly time is 1 hour.
- ?❌ Not intended for use by children.
- ?❌ Keep away from fire or other heat sources.
- ?✔️ We recommend wearing protective gloves.
Assembly Tips:
Incorrect assembly: The diagram shows a person discarding packaging and a box being damaged. Please follow the instruction manuals and use a pad to avoid damage during assembly.
Correct assembly: The diagram shows a person opening the box, placing a pad, and assembling the product on it. Follow the instructions and use a protective pad to avoid damage.
Parts List
- (1) x2: Large Panel
- (2) x1: Medium Panel
- (3) x1: Top Platform Panel
- (4) x1: Small Panel
- (5) x1: Condo Box with Dangling Ball
- (6) x1: Cube Condo
- (7) x1: Textured Ramp
- (8) x4: Sisal Posts (40cm)
- (9) x2: Sisal Posts (33cm)
- (10) x1: Sisal Post (37cm)
- (11) x4: Plain Posts (40cm)
- (12) x1: Plain Post (33cm)
- (13) x4: Plain Posts (27cm)
- (14) x1: Rope Toy
- (15) x1: Toy String
- (16) x1: Angled Platform
Fasteners & Tools:
- (A) x18: Screws (35mm)
- (B) x7: Screws (medium length)
- (C) x2: Screws (25mm)
- (D) x2: Metal Brackets
- (E) x4: Small Screws
- (F) x1: Wall Anchor Kit (Anchor, Screw, Washer)
- (G) x1: Allen Key [allen key]
Assembly Steps
Step 1
Attach the cube condo (6) to the base using four short plain posts (13) and eight long screws (A).
Step 2
Attach the textured ramp (7) and angled platform (16) to a base panel using two metal brackets (D) and four small screws (E).
Step 3
Connect two large base panels (1) to two short sisal posts (8) and two long plain posts (11) using four long screws (A).
Step 4
Attach two medium plain posts (11) and two short sisal posts (8) to the assembled base structure using four medium screws (B). Attach the angled platform (16).
Step 5
Attach the top platform (3) to a medium sisal post (9) and a medium plain post (12) using two long screws (A). Connect two more medium sisal posts (9) to the structure using two medium screws (B).
Step 6
Secure the cube condo (6) to the top platform using two short screws (C).
Step 7
Attach the small panel (4) to the structure using one long screw (A) and one medium screw (B). Attach a medium sisal post (9) to this panel.
Step 8
Attach the condo box (5) to the structure using three long screws (A). Attach a long sisal post (10) to the condo box.
Step 9
Attach the rope toy (14) using the toy string (15).
Step 10
For stability, secure the cat tree to a wall using the provided wall anchor kit (F). [wall anchor] Follow the instructions included with the kit.