Important Information & Assembly Guide
Safety and Handling
Installation Requirements
1 or more people recommended for assembly.
Estimated Assembly Time
Approximately 1 hour.
Safety Warning
This product is not intended for use by children.
Safety Warning
Keep away from fire and heat sources.
Recommendation
Wearing protective gloves is recommended during assembly.
Assembly Best Practices
Follow the instruction manual carefully. Use a protective pad or cover on the floor and for the product to prevent damage during assembly.
Parts List
| Item Number | Description | Quantity |
|---|---|---|
| 1 | Hex Key | x1 |
| 2 | Screw (16mm) | x6 |
| 3 | Screw (25mm) | x2 |
| 4 | Screw (35mm) | x21 |
| 5 | Screw (long, threaded) | x5 |
| 6 | Bracket | x2 |
| 7 | Base Plate | x1 |
| 8 | Top Plate | x1 |
| 9 | Bracket | x1 |
| 10 | Platform with ball toy | x3 |
| 11 | Hanging toy | x1 |
| 12 | Cat House Cube | x1 |
| 13 | Cat Bowl | x1 |
| 14 | Sisal-wrapped post (27cm) | x4 |
| 15 | Sisal-wrapped post (27cm) | x1 |
| 16 | Sisal-wrapped post (20cm) | x1 |
| 17 | Sisal-wrapped post (20cm) | x2 |
| 18 | Sisal-wrapped post (long, threaded) | x3 |
| 19 | Tube/Connector | x6 |
| 20 | Wall Anchor and Screw | x1 |
| 21 | Cat House Cube | x1 |
| 22 | Bracket | x1 |
Assembly Steps
Step 1: Assemble Cat House Cubes
Assemble the two cat house cubes by attaching the side panels (part 19) and the top/bottom panels (parts 12 and 21) using screws (part 4). Ensure 12 screws (part 4) are used per cube.
Step 2: Attach Posts to Base
Attach three sisal-wrapped posts (part 14) to the base plate (part 7) using four screws (part 4).
Step 3: Install Platform and Brackets
Attach bracket (part 22) to the base plate (part 7) using two screws (part 2). Secure the platform (part 8) to bracket (part 22) with two screws (part 2). Attach the hanging toy (part 11) to the platform (part 8) using one screw (part 2). Finally, attach the two side brackets (part 6) to the base plate (part 7) using two screws (part 2).
Step 4: Add Posts and Cat House
Attach one sisal-wrapped post (part 14) to the base plate (part 7) using one screw (part 4). Attach one sisal-wrapped post (part 15) to the base plate (part 7) using two screws (part 5). Place the cat house cube (part 12) onto the base plate (part 7) and secure it with one screw (part 4).
Step 5: Continue Building Levels
Attach the cat bowl (part 13) to a platform using one screw (part 4). Secure the sisal-wrapped post (part 16) and two sisal-wrapped posts (part 17) to the structure using five screws (part 5). Attach the second cat house cube (part 21) using two screws (part 3).
Step 6: Add More Posts and Platforms
Attach two long sisal-wrapped posts (part 18) to the structure using five screws (part 5). Secure a platform using two screws (part 4) and bracket (part 9).
Step 7: Install Top Platforms and Toys
Attach two platforms with toys (part 10) to the upper levels using one screw (part 4) and one screw (part 3). Screw the long sisal-wrapped post (part 18) into the top of the structure.
Step 8: Complete Top Platforms
Attach the final platform with toy (part 10) to the top of the structure.
Step 9: Wall Mounting for Stability
For enhanced stability, it is recommended to secure the cat tree to a wall using the provided wall anchor and screw kit (part 20). Follow the instructions shown in the diagram to properly install the anchor and screw.
Customer Support and Manual Download
If you are not entirely satisfied with your purchase, please follow these steps to contact the seller:
- Go to Your Orders.
- Find your order in the list.
- Select "Problem with order".
- Choose your topic from the displayed list.
- Select "Contact seller".
The manufacturer is Yahee GmbH, located in PRC. The importer is Yahee GmbH, Höpfigheimer Straße 11.7, 4321 Bietigheim-Bissingen.
You can also download the electronic Installation Manual from the "Product guides and documents" section of the advertising page.
