Yaheetech Cat Tree Assembly Instructions

Important Information

Assembly Requirements

?‍?‍? We recommend 2 or more people to install this product.

⏱️ The expected assembly time is approximately 0.5 hours.

Safety Warnings

? This product is not intended for use by children.

? Keep away from fire or other heat sources.

Recommendations

? We recommend wearing protective gloves during assembly.

Assistance

✉️ For assistance or more information, please contact Yaheetech support via email at help@yaheetech.shop.

Assembly Preparation

Please follow the instruction manuals carefully. Use a protective pad or cover on your floor and the product during assembly to avoid damage.

Diagram description: A person is shown preparing the assembly area by laying down a protective mat, contrasting with an incorrect method marked with a cross. This emphasizes the importance of protecting surfaces and the product.

Parts List

• Part 1: Base Plate (x1)
• Part 2: Top Platform (x1)
• Part 3: Ramp (x1)
• Part 4: Cushion/Bed (x1)
• Part 5: Cubby/House (x1)
• Part 6: Middle Platform (x1)
• Part 7: Large Scratching Post (27cm) (x1)
• Part 8: Small Scratching Post (x1)
• Part 9: Connecting Tube (20cm) (x1)
• Part 10: Short Screw (M6x14) (x8)
• Part 11: Bracket/Connector (x2)
• Part 12: Long Screw (M8x40) (x22)
• Part 13: Medium Screw (M8x25) (x3)
• Part 14: Small Screw (M6x14) (x4)
• Part 15: Wall Anchor (x1)
• Part 16: Wall Screw (x1)
• Part 17: Allen Key (x1)

Assembly Steps

Step 1: Assemble Lower Units

Assemble two identical lower units. Each unit consists of a Cubby/House (Part 5) and a Middle Platform (Part 6). Attach the Cubby to the Middle Platform using Short Screws (Part 10) and Long Screws (Part 12). The diagram shows the cubby being screwed into the platform from the outside.

Diagram description: Two identical structures are shown being assembled, each comprising a cubby and a platform, secured with screws. A close-up view details the screw insertion points.

Step 2: Attach Base and Scratching Posts

Attach the Base Plate (Part 1) to the bottom of the assembled lower units. Secure the Small Scratching Post (Part 8) and the Connecting Tube (Part 9) to the Base Plate using Long Screws (Part 12) and Medium Screws (Part 13). The diagram shows the base plate being attached to the structure, and the scratching post and tube being screwed into the base plate.

Diagram description: The base plate is shown being attached to the assembled lower units. A small scratching post and a connecting tube are also attached to the base plate using screws. An arrow indicates the direction of screw insertion.

Step 3: Attach Ramp and Top Platform

Attach the Ramp (Part 3) to the Base Plate (Part 1) and the Top Platform (Part 2). Use Brackets (Part 11) and Small Screws (Part 14) to secure the ramp. The diagram shows the ramp positioned between the base and the top platform.

Diagram description: The ramp is shown being attached to the base plate and the top platform using brackets and screws. An arrow indicates the placement of the ramp.

Step 4: Secure Top Platform

Place the Top Platform (Part 2) onto the main structure. Secure it using Medium Screws (Part 13). The diagram shows the top platform being screwed into the supporting structure.

Diagram description: The top platform is shown being attached to the assembled structure using medium screws. A close-up view illustrates the screw insertion.

Step 5: Attach Scratching Post and Tube

Attach the Large Scratching Post (Part 7) and the Connecting Tube (Part 9) to the main structure. Use Long Screws (Part 12) and Medium Screws (Part 13) for attachment. The diagram shows these parts being screwed into the platforms.

Diagram description: The large scratching post and a connecting tube are shown being attached to the assembled cat tree using screws. Screw locations are indicated.

Step 6: Add Cushion

Place the Cushion/Bed (Part 4) onto the Top Platform (Part 2). Secure it using Long Screws (Part 12). The diagram shows the cushion being attached to the top platform.

Diagram description: The cushion is shown being placed on the top platform and secured with screws.

Step 7: Wall Anchoring (Optional but Recommended)

For enhanced stability, it is recommended to secure the cat tree to a wall using the provided Wall Anchor (Part 15) and Wall Screw (Part 16). Follow the instructions for wall mounting appropriate for your wall type.

Diagram description: The cat tree is shown with an optional wall anchor and screw being attached to the top section, indicating a method for securing it to a wall for safety.

Support and Feedback

Yaheetech values your feedback. If you had a good experience, consider sharing it to help other shoppers.

If you are not satisfied with your purchase or require assistance, please contact our customer service via email at help@yaheetech.shop.

Download Manual

You can also download a user manual by scanning the QR code provided on the last page of the original document. The manual contains detailed instructions and information.