Yaheetech XL Cat Tree Assembly Instructions

Step 1

Attach two cube-shaped bases (3, 4) to a larger base structure using eight short smooth posts (16) and sixteen 35mm screws (B).

Parts used: 3 (x1), 4 (x1), 16 (x8), B (x16).

Step 2

Assemble a multi-level platform. Two flat boards (1, 2) are connected by smooth cylindrical posts (11, 12) and textured cylindrical posts (15). Four metal rods/dowels (A) and four 35mm screws (B) are used.

Parts used: 1 (x1), 2 (x1), 11 (x1), 12 (x3), 15 (x3), A (x4), B (x4).

Step 3

Integrate the base cube structure (3) with the multi-level platform. An angled platform (5) is attached. A rope with attachment (10) is threaded through a hole. Parts used include one medium textured post (13), two medium textured posts (15), one short textured post (11), four metal rods/dowels (A), and four 35mm screws (B).

Parts used: 5 (x1), 10 (x1), 11 (x1), 13 (x1), 15 (x2), A (x4), B (x4).

Step 4

Add the upper section. A long smooth post (14) is attached to the top. A ladder (9) is attached to a platform. This step uses one 35mm screw (B), one 25mm screw (C), six 16mm screws (D), one L-shaped bracket (E), and two L-shaped brackets (F). Detailed insets show bracket attachments.

Parts used: 9 (x1), 14 (x1), B (x1), C (x1), D (x6), E (x1), F (x2).

Step 5

Attach the top perches. A top perch with a ball toy (6) and a shoe-shaped top perch (7) are secured to posts using one 35mm screw (B). A base board (8) is also part of this step.

Parts used: 6 (x1), 7 (x1), 8 (x1), B (x1).

Step 6

Wall mounting and final note. A wall anchor (G) is shown for securing the unit to the wall. The Allen key (H) is provided for assembly.

Parts used: G (x1), H (x1).

Note: Please remove the bell(s) on the hanging fur ball(s) if your cats tend to eat foreign objects.