DENVER IOC-232 Smart Wi-Fi Camera User Manual

Getting Started

Prepare for Setup

• Prepare your Wi-Fi network and password.
• Ensure your mobile device has iOS 8 or higher, or Android 4.1 or higher.
• Ensure you are using a 2.4 GHz Wi-Fi network. 5 GHz networks are not supported.

Download and Install the DENVER SMART HOME App

Download and install the DENVER SMART HOME application from the App Store or Google Play.

Image Description: Screenshots showing the search results for "denver smart home" in the App Store and Google Play, highlighting the DENVER SMART HOME app icon and the "GET" or "Install" buttons. Includes "Download on the App Store" and "ONTDEK HET OP GOOGLE PLAY" buttons.

App Account Registration

Register an Account in the DENVER SMART HOME App

Step 1: Enter your mobile phone number or email address.

Image Description: App screen showing "Register" options, country selection, input fields for phone number or email, and a button to "Get authentication code".

Step 2: Enter the verification code and create a password.

Image Description: App screen showing input fields for "Enter verification code" and password creation, with a "Resend 081" option.

Power Connection and Restarting

Connecting Power and Restarting the Device

• Unscrew the screws securing the cover on the bottom of the camera (secured by two screws).
• Under the cover, there is a reset button. Press and hold this button until you hear the "Ready to connect" prompt.
• Insert a micro SD card into the slot located under the cover on the bottom.

Image Description: Two views of the camera's base. One shows the overall base. The other, with the cover removed, reveals the micro SD card slot labeled "SD Card" and a reset button labeled "Reset".

Adding Camera to the App

Option 1: Use QR Code

1. In the app, tap "Add Device" in the upper right corner of the screen, then select the "Otherwise" (Inaczej) option.
2. Select "QR Code".
3. Enter your Wi-Fi network name (SSID) and password.
4. Scan the QR code using the camera.

Image Description: A sequence of app screenshots illustrating the QR code pairing process: 1. "Add Device" screen with "Otherwise" option. 2. "Select net-pairing" screen with "QR code net..." option. 3. Screen to enter Wi-Fi SSID and password. 4. Screen displaying a QR code to be scanned.

Option 2: Use Smart Configuration

Step 1: In the app, tap the (+) icon in the upper right corner of the main screen. Then select "Smart camera".

Image Description: App's main screen showing various device icons and a prominent "+" icon in the upper right corner. The "Smart camera" option is highlighted.

Note: The "Smart camera" tab is located in the "Security and sensor" category.

Frequently Asked Questions (FAQ)

Q1: Can I share the camera with family or friends?

A1: Yes, you can share the camera with family or friends. They can then access it and control lighting, electrical switches, or other devices. In the app: tap the profile icon, then "Manage Home". This allows you to grant or revoke sharing permissions. To enable sharing with other users, they must download the app and register a new account.

Q2: What is the wireless range?

A2: The wireless range of the camera depends on your Wi-Fi router and the conditions in the room. Check your router's technical specifications for detailed range information.

Q3: Is the camera unavailable or unreachable?

A3: Ensure your Wi-Fi router has internet access and is within range. Make sure you have the latest app version by checking "Check firmware update" in the device settings within the app.

Q4: The camera cannot connect to the Wi-Fi network.

A4: Ensure you entered the correct Wi-Fi password during configuration. Check for any internet connection problems. If the Wi-Fi signal is too weak, restart your Wi-Fi router and check the signal again.

Q5: How many cameras can I connect?

A5: The DENVER SMART HOME app can connect an unlimited number of devices in an unlimited number of locations. Your Wi-Fi router may have a limit on the number of connected devices.

AC DC ADAPTER Technical Specifications

Note: All products are subject to change without notice. We reserve the right to make errors and omissions in the user manual.

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S

Environmental Information and Compliance

Proper Disposal of Electronic Equipment

Electrical and electronic equipment contains materials, components, and substances that may be hazardous to health and the environment if the waste material (discarded electrical, electronic equipment) is not handled properly.

Electrical and electronic equipment and batteries are marked with a crossed-out symbol of a waste bin ?️. This symbol indicates that electrical and electronic equipment should not be disposed of with household waste but should be collected separately.

All cities have established collection points for electrical and electronic equipment, where such equipment can be handed in free of charge at recycling stations and other collection points or collected from households. Additional information is available from the authority responsible for waste disposal.

Declaration of Conformity

Inter Sales A/S hereby declares that the type of equipment IOC-232 complies with directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.denver-electronics.com. Click the search icon ? at the top of the page. Enter the model number: IOC-232. Navigate to the product page. The RED directive is on the page for download materials/other download files.

Operating frequency range: 2412MHz~2472MHz.

Max. output power: 6W.

Company Information:

DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark

Social Media: www.facebook.com/denverelectronics