Denver IOC-241 Smart Wi-Fi Camera

Safety Information

Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference.

1. This product is not a toy. Keep it out of reach of children.
2. Keep product out of the reach of children and pets to avoid chewing and swallowing.
3. Product operating and storage temperature is from -20 degrees Celsius to 60 degrees Celsius. Temperatures outside this range might affect the function.
4. Never open the product. Touching the inside electrics can cause electric shock. Repairs or service should only be performed by qualified personnel.
5. Only charge with the original adapter supplied with this product!
6. Only use with the attached accessories. Using non-original accessories can make the product work abnormally.

Quick Start Guide

Follow these steps to set up your smart Wi-Fi camera:

Preparation:

• Prepare your Wi-Fi network and password.
• Ensure your mobile device is running iOS 8 or higher or Android 10.0 or higher.
• A 2.4 GHz Wi-Fi network is required. 5 GHz networks are not supported.

Download and Install App:

Download and install the "Tuya Smart" app from the App Store or Google Play.

[Download on the App Store button description]

[Get it on Google Play button description]

Device Registration:

Open the Tuya Smart app. You will be prompted to register your device. Select your country, enter your email address, obtain a verification code, and set your chosen password to confirm.

[Screenshot description: Tuya Smart app showing the User Agreement and Privacy Policy screen with options to 'Agree' or 'Disagree'.]

For new users, please select "Agree" in the tips pop-up.

Important App Permissions:

• Allow Tuya Smart to access mobile cellular data and wireless LAN; otherwise, you cannot add a camera.
• Enable the push notification function on Tuya Smart; otherwise, your phone will not receive alarm push notifications.
• Allow Tuya Smart to use the microphone if you intend to use the 2-way audio function.

Adding a Smart Wi-Fi Camera:

1. Power On: Connect the camera's power cable to an adapter and plug the adapter into a socket. The green indicator light will flash slowly, and you will hear a beep.
2. Add Device in App: Open the "Tuya Smart Home" app, tap the "+" icon, and then tap "Add Device." Choose "Camera & Lock" and then tap "Smart Camera (Wi-Fi)" to add a new smart Wi-Fi camera to your app. [Screenshot description: Tuya Smart app interface showing various device categories like 'Lighting', 'Camera', 'Sensors', 'Small Home Appliances', 'Camera & Lock', etc. The 'Camera & Lock' section is highlighted, and within it, 'Smart Camera (Wi-Fi)' is visible.]
3. Pairing: When the indicator light on the camera is flashing slowly, tap "Next" in the app.
4. Wi-Fi Network: Select the same Wi-Fi network your phone or tablet is connected to and input the Wi-Fi password, then tap "Confirm." Ensure you are connecting to a 2.4 GHz network. [Screenshot description: Tuya Smart app screen prompting to select a 2.4 GHz Wi-Fi network and enter the password. It mentions a common router setting method for 5GHz to 2.4GHz conversion.]
5. QR Code Scan: Tap "Continue." Your mobile phone will display a QR code. Position the camera to scan this QR code from approximately 15 cm to 20 cm away. [Screenshot description: Tuya Smart app displaying a QR code for the camera to scan.]
6. Connection Confirmation: Once you hear a prompt sound from the camera, tap "I Heard a Prompt" in the app. The smart Wi-Fi camera will attempt to connect. Upon successful connection, the app will display "Added successfully" and "Security Camera added successfully." The camera indicator light will stop flashing and remain solid green. [Screenshot description: Tuya Smart app showing the "Connecting Device" screen with a progress indicator and timer.] [Screenshot description: Tuya Smart app showing "1 device(s) added successfully" with the camera listed as "Security Camera".]
7. Completion: Tap "Done" to view the live stream of your camera. [Screenshot description: Tuya Smart app showing the main device list with the "Security Camera" added and an option for "Smart Protect" to control camera and alarm functions.]

Detection Alarm Settings:

Navigate to "Detection Alarm Settings" within the app to turn the motion detection alarm on or off. When enabled, any detected motion will trigger a notification. You can check notifications on the "Message" tab. Motion alarm sensitivity levels can be set as follows:

• Low Sensitivity – records any movements within 5 meters
• Medium Sensitivity – records any movements within 10 meters
• High Sensitivity – records any movements within 15 meters

Remove Device:

Tap "Remove Device" if you wish to delete this camera from your account.

Recording with Micro SD Card:

A Micro SD card (not included) enables Event Recording or Non-Stop Recording. When the card reaches its maximum storage capacity, it will automatically overwrite the oldest recording with new data. For long-term storage of important recordings, it is recommended to transfer them from the Micro SD card to your computer or another storage device. Recorded videos can be viewed via the playback icon in the app.

AC/DC ADAPTER Specifications

Please note: All products are subject to change without any notice. Reservations are taken for errors and omissions in the manual.

ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S

[Denver Logo]

[CE marking]

Declarations and Disposal Information

Electric and electronic equipment contains materials, components, and substances that can be hazardous to your health and the environment if not handled correctly. Such equipment is marked with the crossed-out trash can symbol [WEEE disposal symbol], signifying it should not be disposed of with other household waste but should be disposed of separately.

All cities have established collection points where electric and electronic equipment can be submitted free of charge at recycling stations and other collection sites, or be collected from households. Additional information is available from your city's technical department.

EU Declaration of Conformity

Denver A/S hereby declares that the radio equipment type IOC-241 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: denver.eu. Navigate to the website, click the search icon on the topline, enter model number IOC-241, and find the product page. The RED directive information is located under downloads/other downloads.

Operating Frequency Range: 2.4~2.4835 GHz

Max Output Power: 4.8W

DENVER A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denver.eu

Contact Information

Main contact point: contact.hq@denver.eu

Nordics

Headquarter
Denver A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
Phone: +45 86 22 61 00 (Push "1" for support)
E-Mail (Technical questions): support.hq@denver.eu
E-Mail (Other questions): contact.hq@denver.eu

Germany

Denver Germany GmbH Service
Max-Emanuel-Str. 4
94036 Passau
Phone: +49 851 379 369 40
E-Mail: support.de@denver.eu

Fairfixx GmbH (Repair and service for TV, E-Mobility/Hoverboards/Balanceboards, Smartphones & Tablets)
Rudolf-Diesel-Str. 3 TOR 2
53859 Niederkassel
Phone: +49851379 369 69
E-Mail: denver@fairfixx.de

Benelux

DENVER BENELUX B.V.
Barwoutswaarder 13C+D
3449 HE Woerden
The Netherlands
Phone: 0900-3437623
E-Mail: support.nl@denver.eu

Austria

Lurf Premium Service GmbH
Deutschstrasse 1
1230 Wien
Phone: +431904 3085
E-Mail: denver@lurfservice.at

Spain/Portugal

DENVER SPAIN S.A
Ronda Augustes y Louis Lumiere, nº 23 – nave 16
Parque Tecnológico
46980 PATERNA
Valencia (Spain)
Spain Phone: +34 960046 883
E-Mail: support.es@denver.eu

Portugal Phone: +35 1255 240 294
E-Mail: denver.service@satfiel.com

Poland

LetMeRepair Poland sp. z O.O.
ul. Częstochowska 140
62-800 Kalisz
Phone: 62 75 38 092
E-Mail: denver-service@letmerepair.pl
Working hours: 8 – 18 (Monday – Friday)

If your country is not listed above, please write an email to contact.hq@denver.eu.

[Denver Logo]

[PAP logo]