Manuals+
Aurora AU-ADFRC Installation Guide

AURORA

Installing Standard Version (AU-ADSTxxxx)

Step 1: Preparation

If the fixture is already installed, turn off mains power, remove the inner baffle from the ceiling, and skip to Step 2.

Step 2: Remove Bezel

Remove the bezel from the fixture.

Step 3: Remove Light

Remove the light fitting from the inner baffle.

Step 4: Connect Components

Align the notch on the light fitting with the clip on the fixture and connect. You should hear a 'click' indicating a secure connection.

Step 5: Final Installation

Refer to the luminaire's specific installation guide for the final installation steps.

Installing GU10 Version (AU-ADGUSTxxxx)

Step 1: Preparation

If the fixture is already installed, turn off mains power, remove the inner baffle from the ceiling, and skip to Step 2.

Step 2: Remove Bezel

Remove the bezel from the fixture.

Step 3: Remove Light

Remove the light fitting from the inner baffle.

Step 4: Connect Components

Align the notch on the light fitting with the clip on the fixture and connect. You should hear a 'click' indicating a secure connection.

Step 5: Final Installation

Refer to the luminaire's specific installation guide for the final installation steps.

Important Installation Information

Environmental Protection and Guarantee

Environmental Protection (W.E.E.E.)

Aurora's WEEE Reg.No. WEE/BG0130YX (UK Only). Waste Electrical & Electronic Equipment Regulations (WEEE) require that products with this marking must not be disposed of with other household or commercial waste. Aurora does not charge customers for WEEE disposal. To prevent environmental harm, separate WEEE products and recycle them responsibly at local facilities. Consult local authorities or retailers for recycling advice. If a WEEE disposal fee was included at purchase, contact your supplier for take-back advice.

Guarantee

This product is guaranteed for 3 years from the date of purchase. The guarantee is invalid for improper use, installation, tampering, removal of the QC date label, installation in an unsuitable working environment, or installation not according to current National Wiring Regulations. Aurora will replace faulty units free of charge, subject to correct installation and return of the unit. Aurora is not responsible for installation costs associated with replacement. This warranty is in addition to statutory rights.

Models: AU-ADST Primo Fire Rated Can for Fixed Primo - Electrical 4 Less, AU-ADST, Primo Fire Rated Can for Fixed Primo - Electrical 4 Less, Fire Rated Can for Fixed Primo - Electrical 4 Less, Primo - Electrical 4 Less, Electrical 4 Less, Less

File Info : application/pdf, 3 Pages, 530.74KB

PDF preview unavailable. Download the PDF instead.

316323

References

GPL Ghostscript 9.50 Adobe InDesign 14.0 (Macintosh)

Related Documents

Preview Aurora LumiCS LED Downlight Installation Guide
Comprehensive installation guide for Aurora LumiCS LED downlights, covering safety, wiring, and fitting instructions for models AU-DDLH412CS, AU-DDLH618CS, AU-DDLH818CS, AU-DDLH825CS, and AU-DDLH835CS. Features colour temperature switching and IP54 rating.
Preview Aurora AU-R6CWSBF LED Downlight: Installation Guide and Specifications
This document provides installation instructions for the Aurora AU-R6CWSBF LED downlight. It details safety precautions, wiring, wattage and colour temperature selection, and environmental disposal information. Ensure proper installation by a qualified electrician for optimal performance and safety.
Preview Aurora 12V Constant Voltage 16W LED Driver Installation Guide
Installation and safety guide for Aurora 12V Constant Voltage 16W LED Drivers (AU-LED16IP/AU-LED16T). Covers wiring, parallel connections, IP rating, lamp compatibility, and warranty information.
Preview Aurora AU-A1ZBSCD Zigbee 3.0 LED Strip Controller - Technical Guide
Comprehensive guide for the Aurora AU-A1ZBSCD Zigbee 3.0 LED strip controller, covering specifications, important safety information, app connectivity, installation guidelines, EU declaration, WEEE compliance, and warranty.
Preview Aurora GLS LED Lamp Declaration of Conformity
Official Declaration of Conformity for Aurora GLS LED Lamps, confirming compliance with key EU directives (LVD, EMC, RoHS, WEEE, RED) and relevant harmonized standards.
Preview Aurora AU-DSPLED 1-10V Dimmer Switch Installation and Wiring Guide
Comprehensive installation instructions and wiring diagrams for the Aurora AU-DSPLED 1-10V Dimmer Switch. Learn how to install and connect this rotary control dimmer for dimmable LED drivers and ballasts in 1-way and 2-way lighting circuits.
Preview Aurora Lumi-Fit Fixed LED Downlight Installation Manual
Comprehensive installation and user guide for the Aurora Lumi-Fit Fixed LED Downlight (25W, 2600lm). Covers safety precautions, technical specifications, step-by-step installation, maintenance, and warranty information.
Preview Aurora Spryte LED Downlight Installation and Safety Guide
Comprehensive guide for installing Aurora Spryte LED downlights, including safety precautions, electrical connections, dimming compatibility, and warranty information. Covers models EN-DL10160, DDL10160, DDL10260, and DDL1019.