Product Overview
This document provides essential installation and safety information for the Aurora 12V Constant Voltage 16W LED Driver, including models like the AU-LED16IP and AU-LED16T.
The driver is designed to power 12V DC constant voltage LED lamps and is suitable for various lighting applications.
- Model Series: 12V Constant Voltage 16W LED Driver
- Brand: Aurora
- Output Voltage: 12V DC
- Maximum Power: 16W
- Key Feature (AU-LED16IP): IP68 rated for water submersion.
Installation Guidelines
Installation must be carried out in accordance with the latest National Wiring Regulations. If in doubt, consult a qualified electrician.
Crucial Installation Points:
- Constant Voltage LED lamps MUST be wired in PARALLEL.
- Correct polarity (+/-) must be observed for all connections to ensure proper operation.
- Ensure all electrical connections are tight and secure.
- Keep the LED driver away from direct sources of heat.
Lamp Compatibility
The following table helps calculate the number of LED lamps that can be connected to the driver, up to a maximum of 16W total load. Different lamp types can be combined.
| Lamp Type (e.g., MR8) | Wattage | Min Lamps per Controller | Max Lamps per Controller |
|---|---|---|---|
| MR8 | 0.3W | 2 | 53 |
| MR8 | 0.4W | 1 | 40 |
| MR8 | 1.2W | 1 | 13 |
Environmental and Warranty Information
Aurora supports environmental responsibility through adherence to WEEE regulations for electronic waste. Please recycle responsibly.
For comprehensive warranty details and terms, please visit www.auroralighting.com.
The warranty is invalid in cases of improper use, tampering, or installation not conforming to regulations.
