JABLOTRON JA-110A II Buss Internal Siren with Battery Backup

Introduction

This document provides information on the JABLOTRON JA-110A II Buss internal siren with battery backup. This siren is a component of the JABLOTRON system, designed for indoor alarm indication.

Note: This document has been machine-translated from the English original. In case of any ambiguities or doubts, please refer to the original version. For questions or errors, contact technical support.

Product Functionality

The JA-110A II siren can be used to silence alarm indications. It can also confirm the presence of individuals in a location or trigger a panic alarm, depending on its configuration.

Installation should be performed by a trained technician holding a valid certificate from an authorized distributor.

Installation

Figure 1: Siren Disassembly

To disassemble the siren before installation:

• Remove the siren cover from the plastic frame by pressing on one side of the cover [1.] with a screwdriver, as illustrated in Figure 1.
• Remove the middle part of the frame [3.] by pressing on the four tabs indicated by arrows [2.].

Figure 2: Internal Parts Description

The internal components of the siren are as follows:

• 1 - LED indicators
• 2 - Buttons
• 3 - Manufacturing number
• 4 - Button tabs
• 5 - Piezoelectric siren
• 6 - Bus terminal
• 7 - Tamper sensors
• 8 - Battery connector for BAT-3V2-CR2

Installation Steps

1. Remove the siren cover from the plastic frame by pressing on one side of the cover [1.] with a screwdriver, as shown in Figure 1.
2. Remove the middle part of the frame [3.] by pressing on the 4 tabs marked with arrows [2.].
3. Thread the BUS cable through a designated rectangular cutout in the plastic base.
4. Fasten the plastic base to the chosen location using screws. If the siren uses a battery, place it under the top side of the plastic base as shown in Figure 1. Mount the plastic frame, ensuring the plastic base secures the battery in place.

System Assignment and Settings

The assignment and settings of the JA-110A II depend on the type of control panel. Refer to the control panel's manual for recommended software or application usage.

Specifications

Compliance and Declarations

JABLOTRON a.s. declares that the JA-110A II complies with relevant European Union harmonisation legislation, including Directives: 2014/35/EU, 2014/30/EU, 2011/65/EU. The original Declaration of Conformity is available at www.jablotron.com in the Downloads section.

The product also bears CE and UKCA markings, indicating compliance with relevant standards.

Environmental Considerations

Proper disposal of this product helps conserve valuable resources and prevents potential negative impacts on human health and the environment. Please return the product to your retailer or contact your local authority for information on the nearest collection point.