IKEA STOCKHOLM 2025 Coffee Table Assembly Instructions

General Information

This document provides assembly instructions for the IKEA STOCKHOLM 2025 coffee table.

Important Notes:

• Ensure you have the correct tools, such as a screwdriver [screwdriver].
• Handle all parts with care to prevent damage during assembly.
• If you encounter any difficulties, refer to these instructions or contact IKEA for assistance.

Parts List

The following parts are included in the package:

• Wooden Dowel (Part 120173): 1x
• Wooden Dowel (Part 101354): 1x
• Connecting Bracket (Part 10121079): 4x
• Screw (Part 100372): 8x
• Cam Lock Nut (Part 10137133): 2x
• Screw (Part 10119262): 2x
• Connecting Rod (Part 10121294): 1x
• Support Bracket (Part 107971): 4x

Assembly Steps

1. Step 1

   Insert wooden dowels (120173, 101354) into the pre-drilled holes on the two curved leg components. Connect these leg components to the central base structure.

2. Step 3

   Insert cam lock nuts (10137133) into the larger holes on the leg components.

3. Step 4

   Insert connecting bolts (10121294) into the smaller holes on the leg components. Attach the connecting rod to these bolts.

4. Step 5

   Secure the connecting rod by inserting screws (10119262) and tightening them with a screwdriver [screwdriver].

5. Step 6

   Insert cam lock nuts (10137133) into the base structure where the second set of leg components will attach.

6. Step 7

   Connect the two main leg assemblies together.

7. Step 8

   Secure the connection by inserting screws (10119262) and tightening them.

8. Step 9

   Attach the support brackets (107971) to the top of the leg structures using screws.

9. Step 10

   Place the first circular support ring onto the assembled base structure.

10. Step 11

    Secure the first circular support ring to the leg structure using screws (100372) and connecting brackets (10121079).

11. Step 12

    Place the glass tabletop onto the assembled base structure.

12. Step 13

    Secure the glass tabletop by inserting screws (100372) through the designated holes.

13. Step 14

    Place the second circular support ring onto the base structure.

14. Step 15

    Secure the second circular support ring to the base structure using screws (100372) and connecting brackets (10121079).