SOUNDMATES PRO ANC

Introduction & Features

SOUNDMATES ANC are your solution for true wireless freedom and high-quality audio. Stereo sound and active noise canceling technology let you hear music and phone calls the way they were meant to be heard, while the compact charging carry case makes them perfect for keeping up with everyday life.

Key Features:

• Noise-Canceling
• Up to 5 hours play/talk time
• 4 x Recharges in the case
• Bluetooth 5.0 connectivity
• Auto-Pairing functionality

Controls

Play/Pause

• Touch the Right (R) or Left (L) earbud 2 times.

Next Song

• Touch the Right (R) earbud 3 times.

Previous Song / Rewind

• Touch the Left (L) earbud 3 times.

ANC Mode (Active Noise Canceling)

• Touch and hold the Right (R) earbud for 2 seconds to toggle between "Noise Canceling ON" and "Noise Canceling OFF".

Reset Earbud Pairing

Follow these steps to reset the earbuds and clear previous connections:

1. Remove both earbuds from the charging case.
2. Ensure both earbuds are powered off. Touch and hold both the Left (L) and Right (R) earbuds for 10 seconds until "Device Pairing" is heard. This action clears all saved connection records and paired devices.
3. The earbuds will automatically re-pair with each other after "Soundmates Connected" is heard.
4. Open the Bluetooth pairing list on your phone or device and select "Soundmates ANC" to connect.

Remark: Ensure both earbuds are powered off before initiating the reset process.

Product Overview & Contents

The product includes the SOUNDMATES PRO ANC earbuds, a charging case, a USB Type-C charging cable, and three sizes of silicone ear tips (small, medium, large) for a custom fit.

Included Items:

• Soundmates ANC earbuds
• Charging carry case
• Type-C cable
• Small, medium, and large earbud tips

Pairing With Your Devices

To connect your Soundmates ANC earbuds to a device:

1. Remove the earbuds from the charging case.
2. Open the Bluetooth pairing list on your device.
3. Select "Soundmates ANC" from the list to connect.

Your device should now be paired and ready for use.

Charging

Earbud Charging:

Place the earbuds into the charging case. They will begin charging automatically if the case has power.

The indicator light on the charging case flashes red while charging.

The LED on the earbuds lights up red during charging and turns off when fully charged.

Once the earbuds are fully charged, the case lights will turn solid red.

Case Charging:

Recharge the carry case using the included Type-C cable.

Power Controls

Power ON

The earbuds automatically power on when removed from the charging case.

Alternatively, touch and hold either the Right (R) or Left (L) earbud for 2 seconds to hear "Power On".

Power OFF

Place the earbuds back into the charging case to power them off.

Alternatively, touch and hold either earbud for 5 seconds to hear "Power OFF".

Call Controls

Answer Incoming Call

• Touch the Right (R) or Left (L) earbud 1 time.

End Current Call

• Touch the Right (R) or Left (L) earbud 2 times.

Reject Incoming Call

• Touch and hold the Right (R) or Left (L) earbud for 2 seconds until a prompt sound is heard.

Specifications

Safeguards

• Do not use this unit for anything other than its intended use.
• Keep the unit away from heat sources, direct sunlight, humidity, water, or any other liquid.
• Do not expose the device to extremely high or low temperatures, as this may damage the battery.
• Do not operate the unit if it has been wet or moist to prevent against electric shock and/or injury to yourself and damage to the unit.
• Do not use the unit if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
• Keep the unit out of reach of children. This unit is not a toy.

Battery Disposal

This product contains a lithium polymer battery. Lithium polymer batteries are environmentally safe when fully discharged. Please refer to your local and state laws for battery disposal procedures.

FCC Compliance

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Support

If you have any other questions or issues with product use and/or care, please contact tzumi Technical Support at: 1-855-GO-TZUMI or support@tzumi.com