IKEA PLATSA Assembly Instructions
Important Safety Information
WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.
Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
Parts List
The following parts are included in the package:
- 4x Screws (Part #108736)
- 4x Dowels (Part #152059)
- 8x Screws (Part #151705)
- 8x Wall Plugs (Part #151706)
- 2x Caps (Part #10005905)
- 2x Caps (Part #126916)
- 2x Feet (Part #150689)
- 2x Brackets (Part #150688)
- 1x Connecting Plate
Assembly Steps
-
Connect the side panels using the provided connectors. Ensure the connectors are securely fastened.
Illustration: Shows two panels being joined with a cam lock and screw mechanism.
-
Attach the bottom panel to the side panels.
Illustration: Shows the bottom panel being inserted into the grooves of the side panels.
-
Attach the top panel to the side panels.
Illustration: Shows the top panel being placed on top of the side panels and secured.
-
Insert the back panel into the grooves of the assembled frame.
Illustration: Shows the back panel sliding into place.
-
Secure the back panel using the provided screws.
Illustration: Shows screws being inserted into the back panel to secure it to the frame.
-
Attach the feet to the bottom of the unit using the provided screws.
Illustration: Shows the feet being screwed into the base of the unit.
-
Attach the brackets to the back of the unit for wall mounting.
Illustration: Shows brackets being attached to the rear of the cabinet.
-
Mount the unit to the wall using appropriate screws and plugs for your wall type. Ensure the unit is securely fastened to prevent tipping.
Illustration: Shows the unit being secured to a wall with screws and wall plugs. A warning symbol is displayed.
-
If stacking units, use the provided connecting plates and screws to join them securely. Maximum stacking height is 300 cm (118 7/64").
Illustration: Shows two units being stacked and connected with a connecting plate.
-
Final check of all connections and stability.
Illustration: Shows a person checking the stability of the assembled unit.
Care and Maintenance
Wipe clean with a damp cloth. Wipe dry with a clean cloth.