Product Overview
The WYBOT Robotic Pool Cleaner, including the C2 and C2 Vision models, offers advanced features for optimal pool maintenance. It is designed for high efficiency, low power consumption, and ease of use, featuring one-button activation, powerful suction, fine filtration, smart navigation, and remote control capabilities. This ensures a convenient, intelligent, and thorough cleaning experience for various pool types.
Safety Instructions
Warnings
- Use only recommended accessories and authorized chargers from WYBOTICS Co., Ltd.
- Power off the robot before any maintenance or removal from the pool.
- Ensure the charging port is dry before plugging in the charger.
- Make sure electrical outlets are protected by GFCI and ELI.
- Do not use damaged chargers or unauthorized extension cords.
- Never allow children to ride on or play with the cleaner or docking station.
- Do not allow children to operate or maintain the device.
- Do not enter the pool while the robot is operating.
- Never expose or charge the device in flammable environments.
- Only licensed professionals should disassemble sealed parts of the robot.
Cautions
- Charge the unit before first use.
- Avoid overcharging to preserve battery life.
- Charge the cleaner periodically if stored for over 6 months.
- Do not operate the cleaner while the pool filter is running.
- Wash and clean the filter basket and ultra-fine filter after each use.
- Store the cleaner in a cool, ventilated place away from direct sunshine or heat sources.
Recommended Water Conditions
| Parameter | Specification |
|---|---|
| Chlorine | Max 4 mg/L |
| pH | 7.0 - 7.8 |
| Temperature | 41-95 °F (5-35 °C) |
| NaCl | Maximum 5000 PPM |
Getting Started
Charging
Before first use and when the battery is low, charge the device using the included cable and adapter. Ensure the device is at least 3 meters (approx. 10 ft) away from the pool edge during charging and kept away from direct sunshine or water to reduce fire risk.
LED Indicators
| LED Light | Indication | Status |
|---|---|---|
| Blue | Solid | Power On |
| Blue | Flashing | Connecting to App |
| Purple | Solid | Under working |
| Yellow | Flashing | Low battery or under self-parking |
| Green | Flashing | Charging in progress |
| Green | Solid | Fully charged |
| Red | Solid or flashing | Fault |
Setup and App Connection
To set up your WYBOT cleaner, turn it on using the on/off button. The LED indicator will display the current battery level. Download the WYBOT App from Google Play or the App Store to connect your smart mobile device. Ensure your mobile device meets the specified operating system requirements (iOS 15.0 or later, Android 8.0 or later).
Maintenance and Support
Regular maintenance, including cleaning the filter basket and ultra-fine filter after each use, is crucial for optimal performance. Proper storage in a cool, ventilated area is also recommended. For troubleshooting or further assistance, consult the FAQ & Trouble Shooting section or contact WYBOTICS Co., Ltd. via their official website or provided email.
