WYBOT C2 & C2 Vision Robotic Pool Cleaner User Manual
Thank you for choosing WYBOT products. This manual provides essential information for the safe and effective operation of your new robotic pool cleaner. Please read it thoroughly and keep it for future reference.
01: WYBOT At A Glance
External Product Presentation
The robotic pool cleaner features several key components:
- a) Handle: Used for lifting and transporting the device.
- b) LED Indicator: Various light colors indicate the device's status.
- c) ON/OFF Button: Powers the device on or off.
- d) Pump: Sucks in debris and pumps water out through the outlet.
- e) Charging Port: Connect the charging cable here.
- f) Track: Enhances the device's ability to climb walls and navigate obstacles.
- g) Wash Brush: Removes dirt and collects it within the device.
- h) Camera (WYBOT C2 Vision only): Visualizes dirt and obstacles for targeted cleaning.
Internal Product Presentation
- i) Lid Opening Button: Opens the lid to access and remove the filter basket.
- k) Water Outlet: Facilitates rapid water evacuation.
- m) Ultra-fine Filter: An auxiliary filter designed to capture fine dirt particles. It is recommended for use in "turbo floor" mode. Avoid installation if the floor is very dirty, as this may impact vacuum performance.
- n) Filter Basket: Stores collected dirt and debris. It must be installed before cleaning and washed after each use.
Packing List
- Device x 1
- Filter x 2
- Quick Start Guide x 1
- User Manual x 1
- Charger x 1
- Floating Parts
02: Getting Started
Charge Your New WYBOT
The device is equipped with a rechargeable lithium-ion battery. Ensure the battery is charged before the first use and whenever it is low.
Connect your device to a power outlet using the included cable and adapter. The adapter has a blue indicator light showing the power status. The LED indicators on top of the cleaner will show a solid green light when fully charged.
Important Notes (NB) for Charging:
- During charging, ensure the device is at least 3 meters (approx. 10 feet) away from the pool edge.
- To reduce fire risk, keep the device and adapter away from direct sunlight or water while charging.
- For safety, ensure the device is turned off and the charging port is dry before connecting the charger.
- The optimal environment for charging is 32°F to 95°F (0°C to 35°C) with a relative humidity of 5% to 95%.
LED Indicator Status
The LED indicators provide information about the device's status:
| LED Color | Indication | Status |
|---|---|---|
| Blue (Solid) | Solid | Startup |
| Blue (Flashing) | Flashing | Running |
| Purple (Solid) | Solid | Connecting to the application |
| Yellow (Flashing) | Flashing | Recharging, low battery, or idle in the pool |
| Green (Flashing) | Flashing | Charging in progress |
| Green (Solid) | Solid | Fully charged |
| Red (Solid or Flashing) | Solid or Flashing | Default / Error |
Configure Your New WYBOT
The front LED indicator changes from a light to flashing during charging and becomes solid when the device is fully charged.
Important Notes (NB):
- When the yellow LED flashes, remove the device from the water and charge it.
- If the red LED is on, refer to this manual for troubleshooting or contact customer service.
Connect to Your Application
Download the WYBOT application on your mobile phone by scanning the QR code below, or find it on Google Play or the App Store.
Supported Platforms:
| iOS | Android |
|---|---|
| iOS 15.0 or later | Android 8.0 or later |
Choose Your Cleaning Mode
After connecting to the application, you can pre-set a cleaning mode suitable for your device:
| Mode | Cleaning Coverage |
|---|---|
| Standard Pool Complete | Wall + Floor + Waterline |
| Floor Only | Pool Floors |
| Wall Only | Pool Walls |
| Waterline | Pool Waterline |
| Wall & Floor (Combo) | Wall x1 + Floor x1 |
| Turbo Floor | Intensive cleaning, floor cleaning only |
| Eco Floor | Eco mode, floor cleaning only |
| Dirt Hunting (Floor Cleaning) (WYBOT C2 Vision only) | Vision-based cleaning path |
Important Notes (NB):
- You can modify cleaning modes via the application even when away from the pool.
- If the device restarts, it will automatically enter the cleaning mode you last set.
Launch Your New WYBOT
Follow these steps to start cleaning:
- Hold the cleaner's handle and place it vertically into the pool.
- Let it sink to the floor to release any trapped air inside.
Important Note (NB): For optimal performance, ensure the pool water depth is at least 19.5 inches (50 cm) from the top of the device.
- After approximately 20 seconds of auto-calibration, the indicator light will flash blue. The cleaner is now ready to clean.
- The cleaner begins cleaning walls, floor, and waterline according to the default or your selected settings.
Dirt Hunting Mode (Floor Cleaning Only) (WYBOT C2 Vision Only)
After configuring the dirt hunting cleaning mode via the application, your cleaner will patrol the floor along a defined path after entering the pool. During regular cleaning, the front camera will detect and automatically target dirt when recognized.
The robot learns dirt types from the start and can record them during cleaning, improving its performance over time. Your robot will continue to enhance its capabilities; please update it for the best cleaning experience.
Important Notes (NB):
- The front camera is protected by a factory film; please remove it before executing the 'Dirt-hunting mode'.
- The robot's camera will only be active when underwater.
- The dirt hunting cleaning mode relies on vision; protect the camera from dust or scratches to maintain performance.
Device Operation and Removal:
- The device will automatically move to stop near the pool edge once cleaning is complete or the battery is low.
- You can insert the included hook into a pool pole and lift the cleaner out of the pool.
- Lift the cleaner vertically to quickly drain any internal water.
03: Cleaning the Filter
Follow these steps to clean the filter:
- Hold the filter lid handle, press, and open it.
- Remove the filter basket.
- Empty all debris and rinse with clear water.
- After rinsing, place the filter assembly back into the cleaner and close the lid.
Important Note (NB): Due to internal electrical components, the cleaner should be stored in a cool, ventilated area, away from direct sunlight or heat sources. Charge the cleaner before storing it for extended periods (over 6 months) to maintain optimal battery life.
04: Device Specifications
| Specification | WYBOT C2 | WYBOT C2 Vision |
|---|---|---|
| Name | WYBOT C2 | WYBOT C2 Vision |
| Pool Size | 150m² | 150m²~180m² |
| Depth | 9.8ft (3m) | 9.8ft (3m) |
| Device Dimension (L*W*H) | 360*360*240 mm | 360*360*240 mm |
| Weight | 8kg | 8kg |
| Runtime | 3 hours (Eco Floor) | 3 hours (Eco Floor) |
| Charging Time | 3 hours | 3 hours |
| Power | 65W | 65W |
| Charger Input | 100-240V, 50-60Hz | 100-240V, 50-60Hz |
| Charger Output | 25.2V/1.78A | 25.2V/1.78A |
| Battery Capacity | 4600mAh | 4600mAh |
| Filter | 180µm+Ultra-fine Filter | 180µm+Ultra-fine Filter |
| Movement Speed | 10m/min | 10m/min |
| Water Resistance | IPX8 | IPX8 |
| OTA Update | Available | Available |
| App Connection | Available | Available |
05: Limited Warranty
All WYBOT pool cleaners have undergone inspection and are authorized for sale according to local laws.
- The warranty applies only to original purchasers and is not valid for resale or any other type of transfer.
- Any damage to the device caused by improper use, unauthorized repair, or disassembly is not covered by the WYBOTICS CO., LTD warranty.
- The order number or documentation must be presented for any claim or repair during the warranty period.
Scan the QR code for the warranty policy.
06: Maintaining Your Device
Follow these steps to maintain your cleaner for optimal performance:
- Ensure the device is turned off.
- Dry the cleaner and the filter basket.
- Fully charge the battery.
- Store the cleaner in a cool, ventilated place, away from direct sunlight, heat sources, frost, and pressure. The ambient temperature should be between 5°C/41°F and 45°C/113°F.
- Charge the cleaner every three months to ensure optimal battery lifespan.
Important Note (NB): If your device does not function after a long period of inactivity or after being turned off, please contact the after-sales team for assistance. For your safety, do not attempt to disassemble it without authorization.
07: FAQ & Troubleshooting
Frequently Asked Questions
Q: What pool shapes and construction materials is the cleaner suitable for?
A: The machine can be used for rectangular, oval, or irregular shapes of inground pools. Applicable construction materials include PVC, gunite, and other high-friction materials. Slippery materials like tiles, mosaics, and acrylic may not function correctly and might require modifications.
Q: Will obstacles such as steps, shallow water areas, drains, or slopes affect the cleaner's operation?
A: The machine can climb steps, navigate drains, and operate in shallow water areas.
If you encounter the following situations during use, consult the table below for solutions.
Important Note (NB): If you cannot find a solution in the table, please contact the after-sales team.
Troubleshooting Table
| No. | Problem | Details | Possible Causes | Suggested Solution |
|---|---|---|---|---|
| 1 | Device Not Working | Solid Red Indicator | Turbine is blocked | Check the turbine and remove foreign objects. |
| Flashing Red Indicator | Motor protection | Restart the device. | ||
| Flashing Red Indicator | Device not placed in water or pool water is too shallow | Restart and place immediately in the pool. Ensure water depth is over 0.5m. | ||
| 2 | Impossible to Recharge | Flashing Yellow Indicator | Low battery | Fully charge the device and restart. |
| Charger Indicator Flashing | Poor contact | Reconnect the charger. | ||
| 3 | Cannot Climb Walls | Slippery construction materials | Attach floating parts (Contact service for instructions). | |
| 4 | Abnormal Wall Climbing / Slow Movement | Dirty water | Clean the filter basket. | |
| Drifting away from wall or floating on water | Blocked filter basket / Suction air | Clean the filter basket. / Attach floating parts (Contact service for instructions). | ||
| 5 | Cleans Only Part of the Zone / Cannot Clean Entire Pool | Blocked filter basket / Incorrect cleaning mode | Clean the filter basket. / Connect to the app and select an appropriate cleaning mode. | |
| 6 | Face Up on Ground | Blocked filter basket | Clean the filter basket. | |
| 7 | Does Not Clean According to Defined Path | Encountering obstacles | Clean the filter basket. | |
| 8 | Cannot Connect to Application | Device Power Off | Device power off | Restart the device. |
| Application Cannot Connect When Device is in Pool | Not Available | Not Available | Connect the device to the shore. |
08: Certifications
WYBOT pool cleaning robots have successfully passed all performance and reliability tests and have obtained relevant certifications from the countries where they are sold. You can be assured of their quality.
The device, its accessories, cords, and batteries are recyclable. Please dispose of them responsibly at designated collection points.
09: WYBOT Customer Service
To continuously improve products, the items presented in this manual are subject to actual products, and WYBOTICS CO.,LTD. reserves the right to update them.
If you encounter any problems during use, please contact the after-sales team. For more details, please visit the WYBOTICS website:
Customer Service Contact:
- Email: euservice@wybotpool.com
- Facebook: @WybotPool
- Tel: 1-866-777-6655
Scan the QR code to access the electronic manual.
