WYBOT Robotic Pool Cleaner User Manual

Introduction

Thank you for choosing WYBOT products. WYBOTICS Co., Ltd. is dedicated to providing high-efficiency, low-power consumption, easy-operation, and thorough pool cleaning solutions. The WYBOT Robotic Pool Cleaner features one-button activation, powerful suction and scrubbing, fine filtration, smart navigation, and remote control, ensuring convenient, intelligent, and optimal pool cleaning for various pool shapes and construction materials.

For any questions or advice, WYBOTICS Co., Ltd. can be contacted via email or their website.

Safety Instructions

WYBOT at a Glance

Product External Overview

The robotic pool cleaner features several key components:

• Handle: Used to remove and transport the device.
• LED Indicator: Displays different light colors to indicate device status.
• On/off Button: Powers the device on or off.
• Pump: Pumps out water through a designated window.
• Charging Port: Connects the charger to the cleaner.
• Track: Enhances the device's capability in climbing walls and various obstacles.
• Scrubbing Brush: Knocks loose dirt and rolls it into the device.
• Camera (WYBOT C2 Vision only): Vision technology for high-efficiency cleaning.

Product Internal Overview

The cleaner's internal components include:

• Lid Open Button: Opens the cover to access the filters.
• Water Outlet: Allows for quick release of water.
• Ultra-fine Filter: An auxiliary filter designed to trap fine dirty particles on the floor. Recommended for 'turbo floor mode' only. Do not install if the floor is heavily soiled, as it may influence cleaner operation.
• Filter Basket: Stores collected dirt and debris. Must be installed before cleaning and washed after each use.

Packing List

The package includes:

• Device x 1
• Filters x 2
• Quick Start Guide x 1
• User Manual x 1
• Charger x 1
• Floating Blocks

Get Started

Charge Your New WYBOT

The device has a lithium-ion rechargeable battery and must be charged before first use and when the battery is low. Connect the device to a power outlet using the included cable and adapter.

The adapter has a blue indicator light, indicating power supply status. The LED indicators on top of the cleaner turn solid green when fully charged.

Setup Your New WYBOT

Turn on the device by pressing the on/off button. The LED indicator on top will display solid green for current battery level, then solid blue when the device is on. If the battery level is too low to start cleaning, the LED lights will show a flashing yellow.

Connect to Your App

Download the WYBOT App to your smart mobile device by scanning the QR code or searching on Google Play or App Store.

Choose Your Cleaning Mode

You can choose a cleaning mode for your cleaner through the app after connecting to your App.

Run Your New WYBOT

1. Hold the handle of the robot and put it into the pool vertically.
2. Let it sink down to the floor to empty trapped air inside.

3. After about 20 seconds of self-calibration, the indicator light will turn to a flashing blue. The cleaner is ready to clean.
4. The cleaner begins to clean walls, floor, and waterline as default or as set through the App.

Dirt Hunting Cleaning Mode (Floor Cleaning Only)

If you have chosen the dirt hunting cleaning mode through the App, your cleaner will start cleaning the floor in a high-efficiency cleaning path after entering the pool. During cleaning, the camera on the front of the cleaner will automatically detect and target dirt when recognized. The robot needs to enrich its recognition of dirt from the start; it may turn on and record floor dirt types during cleaning. It will reach its best targeted cleaning performance after one month of cleaning. WYBOT continues enhancing its capability. Update the cleaner to have the best cleaning experience.

Do a Filter Cleaning

1. The device will automatically move to stop by the edge of the wall when finishing cleaning or when the battery is low.
2. Insert the included hook into a pool pole and lift the cleaner out of the pool.
3. Take the cleaner out of the pool vertically to drain inside water quickly.
4. Push the lid open button up to open the cover.
5. Take out the filter basket and ultra-fine filter.
6. Empty all debris and rinse them with clean water.
7. After rinsing, put the filter basket and ultra-fine filter into the cleaner and close the cover.

Device Specification

Limited Warranty

1. All WYBOT pool cleaners have been inspected and licensed to be sold as per local laws.
2. The warranty applies only to original buyers and is not valid for resale or any other kinds of transfer.
3. Any damages to the unit caused by improper use, unauthorized repair, or disassembly are not covered by WYBOTICS Co., Ltd.'s warranty.
4. The order number or record must be presented for any claim or repair within the warranty period.

For warranty policy details, refer to the QR code provided in the original document.

How to Maintain Your Device

Follow these steps to store your cleaner and maintain good performance:

1. Ensure the device is powered off.
2. Dry out the cleaner and filter drawer.
3. Fully charge the battery.
4. Store the cleaner in a cool and ventilated place, away from direct sunshine, heat sources, frost, and squeezing, with an ambient temperature between 5℃/41℉ and 45℃/113℉.
5. Charge the cleaner every three months to ensure optimal battery life.

FAQ & Troubleshooting

Pool Suitability and Obstacles

Q: What pool shapes and construction materials is the cleaner suitable for?
A: The machine can be applied to rectangle, oval, or irregular shapes of in-ground swimming pools. Applicable construction materials include PVC, gunite, tile, and other materials. Slippery materials such as tiles, mosaics, and acrylic may not work well and may require some modification.

Q: Will obstacles such as steps, shallow water areas, drains, slopes, etc., in the swimming pool affect the running?
A: The machine can climb steps, drains, and shallow water areas. These obstacles may influence its cleaning path but will not affect the operation of the machine.

If you encounter the following situations when using the cleaner, you can check the table below and solve them yourself.

Troubleshooting Table

Certification

WYBOT robotic pool cleaners have passed all performance and reliability tests and obtained relevant certifications from the countries in which they are sold, including FC, ETL Listed Intertek, CE, and RoHS compliance.

Customer Care

Due to continuous product improvement, the products in this manual are subject to change, and WYBOTICS Co., Ltd. reserves the right to update products. If you encounter any problems during use, please contact the after-sale team.

For more details, visit the WYBOTICS website: www.wybotpool.com

Wybot Customer Service:

• Email: support@wybotpool.com
• Facebook: @WybotPool
• Tel: 1-866-777-6655

An e-Manual can be accessed by scanning the QR code provided in the original document.

FCC Warning Statement

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.