Robotic Pool Cleaner User Manual

Introduction

Thank you for choosing WYBOT products. WYBOT Robotic Pool Cleaners are designed for high efficiency, low power consumption, easy operation, and thorough pool cleaning. They feature one-button activation, powerful suction and scrubbing, fine filtration, smart navigation, remote control, and compatibility with various pool shapes and materials.

Safety Instructions

General Warnings:

• Use only recommended accessories and the original authorized charger.
• Avoid charging other devices with this charger.
• Power off the robot for maintenance.
• Ensure the charging port is dry before charging.
• Use GFCI and ELI protected electrical outlets.
• Do not use a damaged charger.
• Do not use unauthorized extension cords.
• Children should not ride on or play with the cleaner/docking station.
• Children should not operate or maintain the device.
• Do not enter the pool while the robot is operating.
• Do not charge or expose the device in flammable environments.
• Only licensed professionals should disassemble sealed parts.

• Charge the unit before first use.
• Do not overcharge the cleaner to preserve battery life.
• Charge the cleaner before storing for over 6 months to maintain battery life.
• Do not operate the cleaner while the pool filter is running.
• Wash the filter basket and ultra-fine filter after each use.
• Store the cleaner in a cool, ventilated place away from direct sunshine or heat sources.
• Use the cleaner only in the following water conditions:
  • Chlorine: Max 4 mg/L
  • pH: 7.0-7.8
  • Temperature: 41-95°F (5-35°C)
  • NaCl: Maximum 5000 PPM

01 / WYBOT AT A GLANCE

Product External Overview

The robotic pool cleaner has the following external components:

• Handle (a): Used for removing and transporting the device.
• LED Indicator (b): Displays different light colors to indicate device status.
• On/off Button (c): Turns the device on or off.
• Pump (d): Pumps out water through the window.
• Charging Port (e): Connects the charger to the cleaner.
• Track (f): Enhances the device's capability in climbing walls and navigating obstacles.
• Scrubbing Brush (g): Loosens dirt and rolls it into the device for collection.
• Camera (h) (WYBOT C2 Vision only): Provides vision technology for high-efficiency cleaning.

Product Internal Overview

Internal components include:

• Lid Open Button (j): Opens the cover to take out the filters.
• Water Outlet (k): Allows for quick release of water.
• Ultra-fine Filter (m): An auxiliary filter to trap fine dirty particles. Recommended for 'turbo floor mode'. Avoid using on heavily soiled floors as it may affect operation.
• Filter Basket (n): Stores collected dirt and debris. Must be installed before cleaning and washed after each use.

Packing List

The package includes:

• Device x 1
• Filters x 2
• Quick Start Guide x 1
• User Manual x 1
• Charger x 1
• Floating Blocks

02 / GET STARTED

Charge your new WYBOT

The device is equipped with a lithium-ion rechargeable battery. Charge it before first use and when the battery is low. Connect the device to a power outlet using the included cable and adapter.

The adapter has an indicator that displays a blue light ? for power supply status. The cleaner's LED indicators turn solid green ? when fully charged.

Note:

1. Ensure the device is at least 3m (approx. 10ft) away from the pool edge when charging.
2. Keep the device and adapter away from direct sunshine or water to reduce fire risk.
3. For safety, double-check the device is powered off and the charging port is dry before charging.
4. The optimal charging environment is a temperature of 32-95°F (0-35°C) and humidity at 5-95%.

LED Indicators

Refer to the LED indicators for device status:

Setup your new WYBOT

Turn on the device by pressing the on/off button. The LED indicator shows the current battery level (solid green ?, then solid blue ?). A flashing yellow light ? indicates the battery is too low to start cleaning.

Note:

1. When the yellow light flashes ?, charge the device immediately.
2. If the red LED light ? is on, consult the troubleshooting section or contact service.

Connect to your App

Download the WYBOT App to your smart mobile device by scanning the QR code or from Google Play or App Store. The app requires iOS 15.0 or later, or Android 8.0 or later.

Choose your cleaning mode

Select a cleaning mode for your cleaner via the app after connecting.

Note:

1. Modify cleaning modes via the App when out of the pool. The default mode is 'Wall then floor'.
2. If the device restarts, it will automatically enter the last selected cleaning mode.

Run your new WYBOT

Follow these steps to operate the cleaner:

1. Hold the handle of the robot and place it into the pool vertically.
2. Let it sink to the floor to empty trapped air inside.
3. After approximately 20 seconds of self-calibration, the indicator light will turn to a flashing blue ?. The cleaner is ready to clean.
4. The cleaner begins to clean walls, floor, and waterline as default or as set through the App.

Note: For optimal cleaning performance, ensure the water depth of the pool is at least 19.5 inches (50 cm) from the top of the device.

Dirt hunting cleaning mode (WYBOT C2 Vision only)

If you select the 'Dirt hunting' cleaning mode via the App, the cleaner will start floor cleaning using a high-efficiency path. During cleaning, the camera on the front will automatically detect and target dirt for a more focused cleaning.

The robot learns dirt types over time to improve its targeted cleaning performance. Updates help enhance its capability.

Note:

1. Remove the protective film from the camera before running 'Dirt-hunting mode'.
2. The camera operates only when the robot is underwater.
3. Keep the camera free from dust or scratches to maintain performance.

The device will automatically move to stop by the edge of the wall when finishing cleaning or when the battery is low.

To remove the cleaner:

6. Insert the included hook into a pool pole and lift the cleaner out of the pool.
7. Take the cleaner out of the pool vertically to drain inside water quickly.

03 / DO A FILTER CLEANING

Regular filter cleaning ensures optimal performance:

1. Push the lid open button to open the cover.
2. Take out the filter basket and ultra-fine filter.
3. Empty all debris and rinse them with clean water.
4. After rinsing, put the filter basket and ultra-fine filter back into the cleaner and close the cover.

Note:

1. Store the cleaner in a cool and ventilated place, away from direct sunshine or any heat source.
2. Charge the cleaner prior to being stored for a long time (over 6 months) to maintain an optimal battery life.

04 / DEVICE SPECIFICATION

05 / LIMITED WARRANTY

WYBOT pool cleaners are inspected and licensed according to local laws.

• The warranty applies only to original buyers and is not transferable.
• Damages caused by improper use, unauthorized repair, or disassembly are not covered by WYBOTICS Co., Ltd.'s warranty.
• The order number or record must be presented for any claim or repair within the warranty period.

06 / HOW TO MAINTAIN YOUR DEVICE

Follow these steps to maintain your cleaner's performance:

• Ensure the device is powered off.
• Dry out the cleaner and filter drawer.
• Fully charge the battery.
• Store the cleaner in a cool and ventilated place, away from direct sunshine, heat sources, frost, and squeezing. Maintain an ambient temperature between 5°C/41°F and 45°C/113°F.
• Charge the cleaner every three months to ensure an optimal battery life.

Note: If your device does not work after a long-term low battery life or being off, please contact the after-sale team. Do not attempt to disassemble it without authorization.

07 / FAQ & TROUBLE SHOOTING

Frequently Asked Questions:

Q: What pool shapes and construction materials is the cleaner suitable for?

A: The machine is suitable for rectangle, oval, or irregular shapes of in-ground swimming pools. Applicable construction materials include PVC, gunite, tile, and other materials. Slippery materials like tiles, mosaics, and acrylic may not work well and might require some modification.

Q: Will obstacles such as steps, shallow water areas, drains, slopes, etc., in the swimming pool affect the running?

A: The machine can climb steps, drains, and shallow water areas. These obstacles may influence its cleaning path but will not affect the operation of the machine.

If you encounter situations not covered here, you can check the troubleshooting table or contact the after-sale team.

Troubleshooting Table:

08 / CERTIFICATION

WYBOT robotic pool cleaners have passed performance and reliability tests and obtained relevant certifications. These include:

• FC (Federal Communications Commission)
• ETL (Intertek)
• CE (Conformité Européenne)
• RoHS (Restriction of Hazardous Substances)
• Other symbols indicating compliance and recycling standards.

09 / WYBOT CUSTOMER CARE

WYBOTICS Co., Ltd. is committed to continuous product improvement and reserves the right to update products. If you encounter any problems during use, please contact the after-sale team.

For more details, visit the WYBOTICS website: www.eu.wybotpool.com

Wybot Customer Service:

• Email: euservice@wybotpool.com
• Facebook: @WybotPool
• Tel: 1-866-777-6655

WYBOTICS CO., LTD
No.30, Zhongnan 4th Street West Zone, TEDA Tianjin, China

All trade names are registered trademarks of their respective manufacturers.