Yeelight YLFWD-0062 Smart Light
Product Accessories
- Smart Light × 1
- Data Cable × 1
- Instruction Manual × 1
- Velcro × 1 pair
Instructions for Installation
Connect the device using a DC 5V=2A power supply. The diagram shows a USB cable connecting to a power adapter, which is then plugged into a wall socket to power the smart light.
Device Resetting
To reset the device to factory settings, press and hold the toggle button for 5 seconds within one minute after powering on the device. The device will breathe blue light during the reset process. A change to rainbow streamer light indicates a successful reset.
Note: When using the device in a new network environment, restore factory settings before reconnecting to the network.
The diagram illustrates pressing one of the two buttons on the device, indicating the reset function.
Guideline for Network Setup
- Download the Yeelight Station mobile client from your mobile app store.
- Ensure the device has been powered on and reset successfully. If network distribution fails, the device will automatically close the network distribution window, which can be reopened after re-powering or resetting the device.
- Turn on the Yeelight Station app and follow the on-screen instructions to scan the Matter QR code. This code can be found on the cover of the manual or on the product's control box. Alternatively, you can enter the resetting code located underneath the Matter QR code to complete the network access operation.
The product also supports access to the Yeelight Station app for PCs (Windows). The download address is: https://en.yeelight.com/yeelight-station/.
The diagram shows a smartphone displaying the Yeelight Station APP and a USB connection to the smart light, illustrating the network setup process.
Instructions for Use
Light Button Operations:
- Click: Enter pickup mode or exit pickup mode.
- Continuous click when turning on the light: Switch between different light effects.
- Press and hold: Turn the light on or off.
The diagram shows the light bar with indicators for button functions.
Basic Parameters
- Product model: YLFWD-0062
- Rated power: 10W (100×0.1W/LED module)
- Rated input: DC 5V=2A
- Wireless connection: WiFi IEEE 802.11 b/g/n 2.4GHz, Bluetooth 5.0BLE
- Packaging contents: smart light × 1, manual × 1, data cable × 1, velcro × 1
Safety Precautions
- Please check the voltage before use. Improper voltage may damage the device and cause potential safety hazards.
- This device is for indoor use only.
- To prevent device faults, the operating environment temperature shall be -10°C to 25°C.
- The device is not water-proof.
- Please check all parts such as wires and power supply regularly. Do not use this device with any part damaged.
- The light source of this lamp is not replaceable; when the light source reaches the end of its life, the entire lamp shall be replaced.
- Do not disassemble the device without permission.
- Avoid exposing children under 3 years of age to this device.
- Take care to avoid being scratched by the sharp corners of the device.
- Do not cover the device with flammable materials such as cloth or paper, or embed the device in any object to avoid causing a fire accident.
Compliance and Disposal
EU Declaration of Conformity
Qingdao Yeelink Information Technology Co., Ltd. declares that this equipment complies with the applicable Directives and European Norms, and amendments.
WEEE Disposal and Recycling
Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. [WEEE symbol]
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
CE
