Yeelight Ambient Lamp User Manual
Product Overview
This document provides instructions for the Yeelight Ambient Lamp, a smart lighting device from Yeelight, a Mi Ecosystem company.
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd.
Address: 10-B4 Qingdao Innovation Park B, Qingdao, China.
Customer Support: www.yeelight.com, Tel: 400-619-7969
Standard: Q/QDYLK0001-2016
Specifications
| Feature | Details |
|---|---|
| Brightness Adjustment | 1-100% |
| Relative Humidity | 0-85% |
| Operating Temperature | 14-104°F / -10 to +40°C |
| Battery | Lithium-polymer battery, 3.7V, 2100 mAh |
| System Requirements | Android 4.4 and above, iOS 8.0 and above |
| Rated Power | 6.5 W |
| Power | 5V 1.3A DC |
| Bluetooth Version | 4.2 |
Instructions for Use
Basic Operation
- Turn the lamp on/off by pressing the power button.
- Adjust brightness from 1% to 100% by rotating the button.
- Connect the USB cable to power the device.
Smart Control via App
- Turn on Bluetooth on your mobile device.
- Find "Yeelight" in app stores. Scan the QR code to download the Yeelight app.
- Ensure the switch is in position '3', open the app, and follow the on-screen instructions to connect the lamp.
Safety Measures
Warning:
- Ensure the product meets electrical safety requirements to avoid damage and safety risks.
- Use indoors only.
- Do not use in high humidity.
- Use only the provided USB cable and power adapter.
- Do not disassemble the product. The LED module may be damaged.
- Do not disassemble the product. After its service life, the LED module should be disposed of according to local regulations.
- Avoid safety risks.
Troubleshooting
| Problem | Solution |
|---|---|
| Lamp does not turn on | Ensure the USB cable is properly connected and the power source is working. Check if the battery is charged. |
| Brightness adjustment does not work | Try resetting the lamp to factory settings. If the issue persists, contact customer support. |
| Mobile device not connected to the lamp | Ensure Bluetooth is enabled on your mobile device. Make sure the lamp is within Bluetooth range. Try restarting both the lamp and your mobile device. Check the Yeelight app for connection status. |
Folding Instructions
The lamp is designed for portability and can be folded for storage.
Folded View:
- Dimensions: 80 mm (±0.5) x 80 mm (±0.5) x 400 mm (±0.5) when unfolded.
- The lamp can be folded to a more compact size for transport.
Front View: [Textual description: Front view of the folded lamp.]
Back View: [Textual description: Back view of the folded lamp, showing the base and connection port.]
Resetting to Factory Settings
If you encounter issues or want to reset the lamp:
- Locate the reset button inside the product base.
- Use a thin object (like a paperclip) to press and hold the reset button for 5 seconds.
- The lamp's indicator will flash, and after 5 seconds, it will restart.
- Reset to factory settings is complete.
FCC Compliance Statement
This product complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This product may not cause harmful interference.
- This product must accept any interference received, including interference that may cause undesired operation.
This product generates radio frequency energy and, if not installed and used correctly, may cause interference to radio communications. No guarantee of interference-free operation in particular installations.
If the product causes radio or television reception interference, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the product and the receiver.
- Connect the product to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Xiaomi Ecosystem Product Packaging Drawing
Organization Providing Drawing: Qingdao Yeelink Information Technology Co., Ltd.
Project Name: Yeelight Ambient Lamp
Version Number: 03
Modification: Modified section 2 of Usage Methods
Creation Date: 18.10.2017
Designer: Sun Zhaohua
Material and Technology Requirements:
- Material: Coated paper, 105 g/m²
- Manufacturing Process: Offset printing + Binding + Folding
- Technology: Accurate spectrum, clear print; all colors printed evenly, color printing tolerance ≤ 0.1 mm; folding tolerance ≤ ± 0.5 mm
- Colors: Pantone185C + Cool Gray 11C
Texture Requirements:
- Device Type: Environmentally Friendly Device
- Compliance: All materials must comply with ROHS environmental requirements.
Scale: 1:1 Unit: mm
