Yeelight Crystal Light Lamp

PRODUCT DESCRIPTION

The Yeelight Crystal Light Lamp is a modern lighting fixture designed for home use. It offers adjustable white light, dimming capabilities, height adjustment, and high color rendering index (CRI). It supports various scenes, voice control, wireless control, and software updates.

Diagram Description: The product diagram illustrates the main components of the lamp: a Cable, a Cord, a Ceiling Plate for mounting, the main Lamp Base, and an Ambient Lighting strip. The necessary mounting hardware includes two Expansion Anchors, two Self-tapping Screws, and two Cords.

INSTALLATION INSTRUCTIONS

I. Drilling Holes

1. Remove the lamp and all accessories from the packaging.
2. Choose a suitable location for mounting the lamp.
3. Drill φ8mm holes with an electric drill (Depth L≥40mm) and insert expansion anchors.

II. Attaching the Back Plate

1. Screw a self-tapping screw into the expansion anchor; do not tighten yet, maintain a 3-5mm gap.
2. Pass the cable through the silicone opening and adjust the length.
3. Insert the self-tapping screw into the hole and tighten it towards the narrower part of the hole.
4. Screw the second screw into the other hole and securely press the entire plate.

Ensure the plate is securely mounted and there is no risk of falling.

III. Wiring

1. Strip 6-8mm of the cable cover.
2. Connect the three cables (typically live, neutral, ground) as shown in the diagram, then tighten the screws.

⚠️ Remember grounding.

❗ Disconnect power before starting this process!

IV. Mounting the Ceiling Lamp

1. Adjust the cable length to the cord height (excess cable can be hidden in the lamp).
2. Place and press the back plate cover onto the ceiling.
3. Screw in two screws with the cords to secure the cover.

V. Mounting the Lamp Base

1. Connect both cords to the lamp base and adjust their length.
2. Insert both cables into the ring on the lamp base.

Diagram Note: Press the designated area to release the cords and adjust their length.

SMART CONTROL

1. Download the Yeelight app on your mobile device.
2. Turn on the light, then open the app and connect the lamp by following the on-screen instructions.

? Ensure your Wi-Fi network is enabled and has internet access.

? The lamp also works with the Yeelight remote control.

FEATURES

• ?️ Adjustable White Light
• ☀️ Dimming
• ↕️ Height Adjustment
• ? High CRI
• ? Various Scenes
• ? Voice Control
• ? Wireless Control
• ⬆️ Software Update

RESTARTING

Turn the lamp on and off using the switch 5 times (wait 2 seconds after each on/off cycle). The light will start pulsing, and the lamp will restart after 5 seconds.

If the lamp needs to be connected to a new network, restart it before use.

WARNINGS

1. Check the voltage before using the product. Incorrect voltage may damage the product and create a hazard.
2. The lamp is non-replaceable.
3. The lamp generates heat during operation. Ensure adequate ventilation where the lamp is used.
4. Power is not interrupted when the lamp is turned off via the app or remote. In such cases, do not touch or disassemble the lamp, as there is a risk of electric shock.
5. The ceiling lamp should not be mounted in a location where the light will be within 38cm of the user's eyes.

❗ Disconnect power before installation and strictly follow the instructions.

⚡ Use the assistance of electricians for installation and maintenance. Wiring should comply with IEEE standards or local regulations.

PARAMETERS

• Name: Yeelight Crystal LED Lamp
• Power Factor: 0.9
• Color Temperature: 2700-6000K
• Operating Temperature: -10°~40°C
• Operating Humidity: 0%-85%RH
• Model: YLDL01YL
• Input Power: 220V~50/60Hz 0.16A
• Rated Power: 33W (280x0.093W+14x0.5W/LED)
• Compatibility: Android 4.4, iOS 9.0 and later versions
• Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4GHz, Bluetooth 4.2 BLE

CONTACT & LEGAL

Learn more at www.yeelight.com

Customer Support: Support@Yeelight.com

Manufacturer: Qingdao Yeelink Information Technology Co., Ltd.

Address: F10-B4, Building B, International Innovation Park, KeyuanWeiyi, Laoshan, Qingdao, Shandong, China

All rights reserved. This manual is the property of INNPRO. Copying and distribution for commercial purposes, in whole or in part, without authorization is prohibited.