PLATSA Furniture System
This document provides assembly instructions and safety information for the IKEA PLATSA furniture system. It is presented in multiple languages, with English as the primary language.
Important Safety Warnings
WARNING!
Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.
Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
The document contains detailed safety warnings in numerous languages, including German, French, Dutch, Danish, Icelandic, Norwegian, Finnish, Swedish, Czech, Spanish, Italian, Hungarian, Polish, Estonian, Latvian, Lithuanian, Portuguese, Romanian, Slovak, Bulgarian, Croatian, Greek, Russian, Ukrainian, Serbian, Slovenian, Turkish, Arabic, Korean, Japanese, Malay, Indonesian, Thai, and Vietnamese.
Visual Safety Guidance:
- Diagram 1: Shows a person preparing for assembly with tools such as a screwdriver and spirit level ?️.
- Diagram 2: Illustrates correct and incorrect handling during assembly. One panel assembly is shown with a cross ❌, indicating an incorrect method, while another shows correct assembly on a rug.
- Diagram 3: Depicts a person looking confused ❓ at furniture parts, followed by a scene of the person contacting IKEA via phone ?, suggesting seeking assistance when unsure.
- Diagram 4: A cabinet with an open door is shown with a warning triangle ⚠️. A second image shows a cabinet tipped over, trapping a person, marked with a cross ❌, reinforcing the tip-over hazard.
Parts List
The following parts are included in the package:
- Screw (108736): 4x
- Dowel/Plug (152059): 4x
- Dowel/Plug (151705): 8x
- Screw (151706): 8x
- Screw (146113): 2x
- Cap/Cover (10090922): 2x
- Cap/Cover (10005905): 2x
- Wall attachment bracket (126916): 1x
- Foot/Leg (150688): 2x
- Connector/Bracket (150689): 2x
Assembly Instructions
- Step 1: Connect two side panels using the cam lock system. Insert a screw and then a cam lock, turning it to secure the panels.
- Step 2: Slide the back panel into the grooves of the assembled side panels.
- Step 3: Attach the top and bottom panels to the side panels, securing them with the cam lock system.
- Step 4: Insert shelf support pins into the pre-drilled holes on the inside of the unit.
- Step 5: Secure the main structure by screwing through the side panels into the top and bottom panels using 8x screws (151705) and 8x dowels/plugs (151706).
- Step 6: Attach the feet. Two feet (150688) are shown being attached to the bottom panel using connectors (150689).
- Step 7: Attach two feet (150689) to the bottom of the unit.
- Step 8: Attach the remaining side panels to the main structure.
- Step 9: Insert dowels/pins into the sides of the unit. The 'LÄTTHET' booklet is shown, indicating a system for connecting units.
- Step 10: Attach the wall anchoring bracket (126916) to the top of the unit using screws (10090922) and secure with caps (10005905). A 'Click!' sound is indicated, suggesting a secure fit.
- Step 11: Connect two PLATSA units side-by-side. A bracket (1x 10090922) is used to join them, secured with screws (1x 146113). A numbered list indicates connection points.
- Step 12: Stack two PLATSA units. A maximum stacking height of 300 cm (118 7/64") is indicated. The units are secured together using screws (4x 108736) and dowels (4x 152059).
- Step 13: Connect stacked units using the 'LÄTTHET' system, as shown with a booklet and connecting pins.
- Step 14: Final assembly illustration showing stacked units.
- Step 15: Final assembly illustration showing stacked units.
For detailed instructions and safety information in your preferred language, please refer to the original document.
