CASIO Module No.

IMPORTANT INFORMATION BEFORE USE

Water Resistance

For all categories of watches, the following are prohibited:

• Pressing buttons underwater.
• Moving hands underwater.
• Unscrewing the crown underwater.

If your watch is exposed to salt water, rinse it thoroughly with fresh water and dry it completely. Do not wear watches with leather straps while swimming. Avoid prolonged contact of leather straps with water.

Watches are classified by rating (I to V) according to their degree of water resistance. Consult the table below to determine the correct usage for your watch.

Notes:

• I: Watches are not water-resistant. Avoid all moisture.
• II: WR (Water Resistant) means the model is waterproof according to ISO 2281. Brief contact with water will not cause any problems.
• III: With 5 Bar (50 meters) water resistance, the watch can withstand water pressure as indicated and can be used during showers and brief swimming.
• IV: 10 Bar (100 meters) water resistance means the watch can be used during normal swimming and snorkeling.
• V: 20 Bar (200 meters) water resistance means the watch can be used for scuba diving (excluding depths requiring a helium-oxygen mixture).

Condensation: Slight condensation may form on the inner side of the glass when the product is used in conditions of sudden temperature changes. This phenomenon is due to the laws of physics and is not a defect.

Disclaimer: CASIO COMPUTER CO., LTD. is not responsible for any damage that may occur from the use of this watch and does not accept any claims from third parties.

Setting the Crown

Your watch may differ slightly from the illustrations in this manual.

Note: Some water-resistant watches are equipped with a screw-lock crown. To pull out such a crown, you must first unlock it by turning it in the direction indicated in the illustration. Do not use excessive force when pulling out the crown, as this may cause damage. The watch is not protected from water and moisture when the crown is pulled out. After completing any operations using the crown, return it to its original position and lock it. ⚙️

Setting the Current Time

MODULES 1362, 1398, 1770, 2799, 3378, 4370

Pull out the crown. Rotate it to set the hands to the current time. Push the crown back into its original position.

MODULES 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 1782, 4328, 4394, 4747, 5049, 5284, 5361, 5364, 5375, 5577

1. When the second hand is at the 12 o'clock position, pull out the crown. The second hand will stop.
2. Rotate the crown to set the hands to the current time. Set the minute hand 4-5 minutes ahead of the current time, then move it back to the correct time.
3. When the time signal sounds, push and lock the crown.

MODULES 707, 708, 1331, 1332, 1335, 1336, 1342, 1345, 1346, 1369, 1370, 1373, 1701, 1710, 1711, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, 4393, 5025, 5044, 5058, 5116, 5128, 5180, 5199, 5206, 5207, 5218, 5250, 5340, 5341, 5342, 5343, 5352, 5358, 5383, 5393, 5436, 5507, 5532

1. When the second hand is at the 12 o'clock position, pull out the crown. The second hand will stop.
2. Rotate the crown to set the hands to the current time. For more precise setting, move the minute hand 4-5 minutes ahead of the desired time, then move it back to the current time.
3. Push and lock the crown to resume time display.

Setting the Date

To ensure the date changes at midnight, do not set the date between 8:00 PM and 2:00 AM.

1. Pull out the crown to the first click.
2. Rotate it to set the desired date.
3. Push and lock the crown to its original position.

MODULES 709, 1309, 1333, 1334, 1347, 3716, 5125, 5167, 5223, 5237, 5249, 5339, 5373, 5458, 5474

Setting the Current Time

1. When the second hand is at the 12 o'clock position, pull out the crown. The second hand will stop.
2. Rotate the crown to set the hands to the current time. For more precise setting, move the minute hand 4-5 minutes ahead of the desired time, then move it back to the current time.
3. Push and lock the crown to resume time display.

Setting the Date and Day of the Week

To ensure the date and day of the week change at midnight, do not set the date between 8:00 PM and 2:00 AM.

1. Pull out the crown to the first click.
2. Set the date by rotating the crown counter-clockwise.
3. Set the day of the week by rotating the crown clockwise. Days of the week are indicated in English or Spanish.

4. Push and lock the crown to its original position.

WATCHES WITH BACKLIGHT

• Press and hold button L to illuminate the watch face.
• Backlight duration varies by model (from 2 to 3 seconds, 1 second, or while button L is pressed for module 5577).
• Backlight illumination is performed using electroluminescent (EL) elements or LEDs. EL elements lose power after prolonged use.
• Frequent use of the backlight shortens battery life.
• Turning on the backlight for an extended period or with a low battery charge may cause the watch hands to stop moving for some time.

WATCHES WITH ROTATING BEZEL

Rotate the bezel to align the mark with the minute hand. After some time, you can tell how much time has passed since alignment.

TECHNICAL SPECIFICATIONS

Technical specifications are subject to change without prior notice.

PRODUCT INFORMATION

Name: Electronic / Electro-mechanical Quartz Wristwatches (Men's/Women's)

Brand: CASIO

Manufacturer: CASIO COMPUTER Co., Ltd.

Manufacturer Address: 1-6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan

Importer: OOO "Casio", 127015, Russia, Moscow, ul. Butyrskaya, d. 77

Warranty Period: 2 years

Address of Authorized Organization for Claims: Indicated on the warranty card.