Hooke Road Rear Bumper Installation Instructions
Model: BXG.5303
ATTENTION: Please verify all parts are present and read instructions carefully before starting installation. Please feel free to contact your distributor if you have any kind of question about your purchase.
CONTENTS
Left
Right
A: Main Body
B1&B2: Wings
C1&C2: Mounting Brackets
D: Sensor Brackets
E: Lights
| Qty | Part Name | Size(mm) | Picture | Qty | Part Name | Size(mm) | Picture |
|---|---|---|---|---|---|---|---|
| 12 | Hex Bolt | M12×30 | [Bolt Image] | 18 | Flat Washer | M12×30×2 | [Washer Image] |
| 8 | Button Bolt | M6×16 | [Button Bolt Image] | 12 | Hex Nut | M12 | [Nut Image] |
| 8 | Button Bolt | M4×20 | [Button Bolt Image] | 2 | L-Wrench | M4 | [L-Wrench Image] |
| 12 | Split Lock Washer | D12 | [Split Lock Washer Image] | 2 | EVA | M4 | [EVA Image] |
INSTALLATION INSTRUCTION
-
Step 1
Remove the factory bumper, and retain the factory bolts.
[Image of rear of vehicle with bumper highlighted]
-
Step 2
First, stick the EVA to the main body. Assemble your Hooke Road bumper. Tighten the hardware. Repeat this step on the other side of the bumper.
- (6) M12×30 Hex Bolts
- (6) D12 Split Lock Washers
- (2) EVA
- (6) M12×30×2 Flat Washers
- (6) M12 Hex Nuts
[Exploded view diagram of bumper assembly with EVA and hardware]
-
Step 3
Secure the mounting bracket to the bumper. Do not fully tighten to allow adjustability. Repeat this step on the other side of the bumper.
- (6) M12×30 Hex Bolts
- (6) D12 Split Lock Washers
- (12) M12×30×2 Flat Washers
- (6) M12 Hex Nuts
[Diagram showing mounting bracket attachment to bumper]
-
Step 4
Secure the bumper to the vehicle frame. Adjust the bumper to the desired position. Repeat this step on the other side of the vehicle. Finally, tighten all bolts.
- (6) Factory Bolts
[Image showing bumper being attached to vehicle frame]
-
Step 5
Install the lights to the bumper. Repeat this step on the other side of the bumper.
- (8) M6×16 Button Bolts
[Diagram showing lights being installed on the bumper]
-
Step 6
The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!
[Image of the fully installed rear bumper on the vehicle]
TOOLS REQUIRED
To view online instruction, please scan the QR code.
[QR Code Image]
Google Hooke Road to find your parts.
Feel Free To Share Your Vehicle @Hooke Road4x4 With The Hashtag #hookeroad If You'd Like
[Social Media Icons: Facebook, Instagram, YouTube]
