RUDSTA Glass-Door Cabinet

Safety Warnings ⚠️

Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.

Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.

Warnings are also provided in multiple other languages within the original document.

Assembly Instructions

Step 1

Assemble the base frame. Insert two screws [10073004/10073033] using the Allen key [130445] into the pre-drilled holes of the side frame pieces. The diagram shows the correct orientation and an incorrect method to avoid [❌ incorrect assembly].

Step 2

Continue assembling the base frame. Insert two screws [10073004/10073033] using the Allen key [130445] into the remaining side frame pieces. The diagram shows the correct orientation and an incorrect method to avoid [❌ incorrect assembly].

Step 3

Slide the back panel into the grooves of the assembled frame. Secure the back panel using four screws [10073004/10073033] with the Allen key [130445]. The diagram shows the correct insertion and an incorrect method to avoid [❌ incorrect assembly].

Step 4

Slide the second back panel into the grooves of the frame. Ensure it aligns correctly with the first panel. The diagram shows the correct insertion and alignment.

Step 5

Attach the side support brackets. Insert one screw [10073004/10073033] with the Allen key [130445] to secure each bracket [10060813, 10060815, 10092201]. Four brackets are used in total.

Step 6

Attach the bottom shelf supports. Screw in four knobs/screws [103095] into the designated holes on the frame. The diagram shows the correct insertion and the part number.

Step 7

Insert the shelf support dowels. Place five dowels [10055922, 10055925, 10092180] into the holes on the inner side of the cabinet frame at the desired shelf height.

Step 8

Attach the top frame pieces. Insert four screws [10055922, 10055925, 10092180] into the top frame pieces using the Allen key [130445].

Step 9

Attach the glass doors. Two people are recommended for this step. Align the hinges on the door with the pre-drilled holes on the cabinet frame. Secure the hinges with two screws [part number not explicitly shown but implied by diagram]. The diagram shows the correct alignment and an incorrect method to avoid [❌ incorrect alignment].

Step 10

Attach the top support bar. Insert two screws [117784] with the Allen key [130445] to secure the top bar. The diagram shows the correct insertion and the parts involved.

Step 11

Attach the top frame. The diagram shows how to lift and attach the top frame, ensuring correct alignment. An incorrect method is shown with a cross [❌].

Step 12

Attach the remaining top frame pieces. Insert two screws [117784] with the Allen key [130445] to secure the frame. The diagram shows the correct insertion and an incorrect method to avoid [❌].

Step 13

Attach the back panel. Align the back panel with the frame and secure it using four screws [10073004, 10073033] with the Allen key [130445]. The diagram shows the correct alignment and an incorrect method to avoid [❌].

Step 14

Attach the door handle. Use one screw [10055656] and the Allen key [100006] to attach the door handle. The diagram shows the correct attachment and an incorrect method to avoid [❌].

Step 15

Attach the top cover. Slide the top cover into place, ensuring it aligns with the frame. The diagram shows the correct placement and alignment.

Step 16

Secure the top cover. Insert two screws [10073004, 10073033] with the Allen key [130445] to secure the top cover. The diagram shows the correct insertion.

Step 17

Adjust the cabinet feet. Use the four adjustable feet to level the cabinet on uneven floors. The diagram shows the feet and indicates they can be adjusted by turning them [arrow indicating rotation].

Step 18

Attach the shelf clips. Insert eight shelf clips [114664] into the desired holes on the inner sides of the cabinet. The diagram shows the correct insertion and a click sound [Click!] indicating proper attachment. An incorrect method is shown with a cross [❌].

Step 19

Place the shelves. Insert eight shelf clips [10053415, 10059847, 10092200] into the pre-drilled holes on the cabinet frame at the desired shelf heights. Then, carefully place the shelves [10059420, 10059419] onto the clips. The diagram shows the correct placement of clips and shelves.

Step 20

Final check. Ensure all parts are securely attached and the cabinet is stable. The diagram shows the completed cabinet with shelves in place.