MAULjura 825 72 LED Desk Lamp

Product Overview

The MAULjura 825 72 is a high-quality LED desk lamp designed for precise work in indoor environments. It features a clamp base for secure mounting on horizontal surfaces, adjustable brightness, and a modern design.

Model: MAULjura 825 72

Power: 200-240V~ 50/60 Hz, 65W

Cord Length: Approximately 2.50 meters

Mounting: Clamp for horizontal surfaces

Brand: MAUL

Website: www.maul.de

Intended Use

This luminaire is intended for high-precision work in dry indoor areas such as homes, offices, or workshops. It is designed to operate within an ambient temperature range of -10°C to +40°C and a relative humidity of up to 95%. The lamp is specifically designed to be mounted on horizontal surfaces.

General Safety Instructions

Please read all enclosed operating instructions and information carefully and keep them for future reference.

• Follow all warnings indicated in the documentation and on the device.
• Use the luminaire only when it is technically sound and with an awareness of dangers and risks.
• National safety regulations must be followed for the installation and operation of the luminaires.
• Install the lamp only on a suitable surface using appropriate mounting materials.
• This lamp is intended to illuminate indoor rooms and work areas only.
• Do not mount the luminaires in dry and closed spaces only.
• Do not use in potentially explosive atmospheres, as this can lead to explosions and serious injury or death.
• Installation, repairs, and disassembly of the luminaire must only be carried out by a qualified electrician, unless otherwise stated.
• The luminaire is Electrical Protection Class II, meaning it has sufficient insulation between live and touchable parts and does not require a protective earth conductor.
• Compare the available mains voltage with the operating voltage and frequency specified on the nameplate to ensure they are identical.
• Damaged luminaires must not be used.
• Always disconnect the lamp from the mains power supply before working on it.
• The luminaire must not be altered or modified.
• Do not hang anything from or attach anything to the lamp.
• Do not cover the luminaire.
• Do not leave children unattended with the luminaire; it is not suitable for children.
• Dispose of packaging according to local regulations.
• Before cleaning and maintenance, disconnect the lamp from the power supply and allow it to cool down.
• Clean only with a dry, soft, and lint-free cloth.
• If the external flexible cable or cord of this luminaire is damaged, it must be exclusively replaced by the manufacturer, their service agent, or a similarly qualified person (electrician) to avoid a hazard.
• For replacing the light source, please check the information on the respective operating instructions or packaging to determine if the replacement must be carried out by a trained electrician or a qualified person.

Technical Specifications and Features

• Electrical Protection Class: II (no protective earth conductor)
• Usage Environment: Dry indoor areas only.
• Dimmable: Yes.
• Half Intensity Angle (Beam Angle): 100°.
• Light Source: LED, replaceable by a skilled electrician.
• Operating Device: Replaceable by a skilled electrician.
• Energy Efficiency of Light Sources: Class < D >.
• Compliance: MAUL declares that these lamps conform to European Directives and product-specific directives.
• Disposal: The light may not be disposed of in unsorted household rubbish. It should be disposed of as electrical waste at designated collection facilities. Contact the local city or municipal administration for information on available disposal options and facilities.

Assembly Instructions

The following parts are included:

• Lamp head and arm assembly (1x)
• Base/clamp assembly (1x)
• Screws: 3 x M4 x 25
• Washers: 3 x M4
• Allen key: 1 x SW3
• Wrench: 1 x SW19
• Power cord: 1 x

Step 1: Attach Clamp Base to Lamp Arm

Connect the base/clamp assembly (labeled '2' in diagrams) to the lamp arm (labeled '1' in diagrams). Use three M4 x 25 screws (labeled '3') and three M4 washers (labeled '4'). Tighten these using the provided Allen key (labeled '5').

[Diagram Description: Shows the lamp arm assembly being attached to a vertical post of the clamp base using screws and washers, with an Allen key being used for tightening.]

Step 2: Mount the Luminaire

Mount the luminaire to a horizontal surface using the clamp. Tighten the clamp screw securely, ensuring it is tightened to a maximum of 5 Nm (Newton-meters). This is indicated by a symbol showing a screw with "≤ 5Nm" next to it.

[Diagram Description: Shows the assembled lamp being attached to the edge of a desk or shelf using the clamp mechanism. A close-up shows the clamp screw being tightened.]

Step 3: Connect Power

Connect the power cord (labeled '7') to the power input on the lamp. The cord has a length of approximately 2.50 meters.

[Diagram Description: Shows the power cord being plugged into the base of the lamp.]

Operation

The luminaire is operated via a rotary knob located on the lamp's stem.

• On/Off: Turn the rotary knob to switch the lamp ON or OFF.
• Dimming: Turn the rotary knob to adjust the brightness (dim) of the light.

[Diagram Description: Close-up view of the rotary knob, showing labels for ON/OFF and DIM/MAXIMUM, with an arrow indicating rotation for dimming.]

Spare Parts

The following spare parts are available:

• LED Module: 2 x Art.-No.: 8257109.205
• LED Driver: Art.-No.: 8257109.210A
• Cable Set: Art.-No.: 8257209.220
• LED Strip: 5 x Art.-No.: 8257109.200