VIGO Cass Single Hole Single-Handle Vessel Bathroom Faucet
Model Number: VG03030
Product Features
- PerformanceSpout: Eco-friendly 1.2 GPM and WaterSense certified spout conserves water without sacrificing performance.
- EternalSeal: Ceramic disc cartridge continually prevents leaks and drips for flawless water flow.
- FinishPlated: 7-layer coated finish ensures that the hardware finish is consistent throughout the product.
- Single-hole installation: Supports 1, 2, or 3-hole installation with deck plate sold separately.
- Easy to install: All parts, hardware, and a user-friendly guide are included for DIY installation.
- ADA Compliant: Single handle lever ensures effortless operation of water temperature and pressure.
Certifications & Warranty
This product is certified CUPC, NSF-61, NSF 372, AB1953, CEC, and WaterSense certified by IAPMO R&T.
All VIGO Bathroom Faucets have a Limited Lifetime Warranty.
Certifications include: LEAD FREE, NSF/ABSI 61, UPC, WaterSense (Meets EPA Criteria), Certified by IAPMO R&T.
Tools Required
- Adjustable Wrench
- Eye Protection [?️]
- Safety Gloves [?]
- Plumber's Putty (Optional)
- Pipe Tape
- Flat Screwdrivers [?]
Packing List
- Faucet
- Supply Lines
- Allen Key [?]
- Plumbers Tape
Dimensions
Diagrams show the faucet from the front, side, and top views with detailed measurements in inches and millimeters. The following table summarizes these dimensions:
| Measurement | Value |
|---|---|
| Faucet height | 12" (304mm) |
| Spout reach | 6 1/8" (155mm) |
| Spout height | 7 3/8" (189mm) |
| Hole Diameter | Ø1 3/8" (35mm) |
| Water supply connection | 3/8" |
Parts List
An exploded view diagram illustrates the faucet components. The parts are listed below with their corresponding numbers and part codes:
| # | Part Code | Part Name |
|---|---|---|
| 1 | 68162 | Handle assembly |
| 2 | 68161 | Handle escutcheon |
| 3 | 68163 | Cartridge nut |
| 4 | 64018 | Cartridge |
| 5 | 64042 | Aerator washer |
| 6 | 64043 | Aerator |
| 7 | 68164 | Aerator housing |
| 8 | 68129 | Mounting hardware |
| 9 | 74020 | Supply Hoses |
Installation Steps
Important Note: Installation must be done by a qualified licensed plumber.
STEP 1.1: Preparation
1.1.1 Shut off water supply [?❌].
1.1.2 Remove old faucet and flexible hoses.
1.1.3 Clean sink surface in preparation for the new faucet.
1.1.4 Flush water connection at home to make sure no debris is stuck in the line.
STEP 1.2: Connect Hoses
1.2.1 Apply plumbers tape to threads.
1.2.2 Connect flexible hoses to the brass pipes.
Diagrams show connecting hoses to the faucet body and supply lines.
STEP 1.3: Install New Faucet
1.3.1 Place new faucet in the position on the countertop.
1.3.2 From under the countertop, put rubber washer, metal ring, brass nut on to threaded pin.
1.3.3 Tighten nut [⚙️].
Diagrams illustrate placing the faucet, attaching the rubber washer, metal ring, and nut from underneath the countertop.
STEP 1.4: Open the Water Lines
1.4.1 Wrap tape on cold and hot pipe threads.
1.4.2 Place the hoses.
1.4.3 Screw the hoses onto cold and hot threads.
1.4.4 Open cold and hot water lines [?✅].
Diagrams show wrapping tape on threads and connecting hoses to the faucet's water inlets.
Safety Tips
Installation must be done by a qualified licensed plumber. Read instructions thoroughly and inspect the unit for defects before installation. Contact VIGO Technical Support if you have any questions.
If using soldering for installation, remove seats, cartridges, and washers before using flame. Damage from improper soldering will void the warranty. Protect your eyes with safety glasses [?] when cutting or soldering water supply lines.
Cleaning Recommendations
Modern faucets and showers use diverse materials. To avoid damage, follow specific cleaning criteria and avoid abrasive materials.
Cleaning Instructions for Faucets and Showers
- Clean as needed and when required.
- Adjust cleaning product amount and time based on the product; do not leave cleaner on longer than necessary.
- Clean regularly to prevent calcification.
- When using spray cleaner, spray onto a cloth or sponge first, not directly onto the tapware, to prevent damage from drops entering openings.
- Rinse thoroughly with clean water after cleaning to remove residue.
- Recommended solution for hard water and soap scum: 50% water and 50% vinegar.
Cleaning Materials for Faucets and Showers
Acids are necessary for lime removal, but use caution:
- Use only cleaning materials explicitly designed for this purpose.
- Never use cleaning materials containing hydrochloric, formic, or acetic acid, as they cause considerable damage.
- Avoid phosphoric acid, as it can damage the finish.
- Never mix cleaning materials.
- Never use abrasive cleaning materials such as powdered cleansers, industrial cleansers, scouring pads, or micro fiber cloths.
Icons representing cleaning actions and forbidden chemicals are described as: [? Spray Directly On Tapware], [? Spray Onto Sponge/Cloth], [✨ Clean Regularly], [? Rinse Thoroughly With Clean Water]. Forbidden chemicals are indicated as: [❌ Hydrochloric Acid], [❌ Formic Acid], [❌ Acetic Acid], [❌ Phosphoric Acid].
Limited Lifetime Warranty
VIGO INDUSTRIES, LLC offers a limited warranty on its BATHROOM FAUCET Products for personal household use. This warranty is non-transferable.
Warranty Coverage:
- Hoses and mechanical components: 1 year from the date of purchase.
- Cartridge: 5 years from the date of purchase.
- Finish: Lifetime of the product for the original purchaser/end-user.
Defective products reported within the warranty period will receive replacement parts or troubleshooting assistance. If a replacement unit is necessary, it will be the same model or one of equal value.
Limitations:
- Does not apply to incorrect operating procedures, breakages, or damages caused by improper installation, carelessness, abuse, misuse, misapplication, improper maintenance, or alteration.
- Does not cover damage due to hard water, chemical or natural corrosion, accident, fire, flood, act of God, or any other casualty.
- Avoid abrasive cleaners, steel wools, and harsh chemicals, as they can scratch, damage, or dull the product/finish and void the warranty.
- The owner/end-user is responsible for all labor costs, proper installation, and applicable plumbing/electrical wiring. VIGO does not install or supervise installation.
- Products must be installed and operated according to VIGO's instructions and all applicable rules and regulations.
- Installation by a fully insured, licensed professional is required.
- VIGO is not liable for personal injuries or deaths, or for any indirect, special, incidental, or consequential damages.
Commercial Limitations: For commercial applications, the warranty is 1 year from the date of purchase. VIGO is not responsible for loss of use or profit.
Warranty Conditions: To obtain warranty service, contact VIGO Product Support at 866-591-7792 (Option 2) or SUPPORT@VIGOINDUSTRIES.COM. Proof of purchase and evidence of the defect are required.
Contact Information:
- VIGO Product Support: (866) 591-7792 (Option 2) Monday - Friday 9:30 am - 5:30 pm EST
- Email: SUPPORT@VIGOINDUSTRIES.COM
- Website: vigoindustries.com
