JLab JBuds Mini TWS Black User Manual

Welcome to JLab

We love that you are rocking JLab! We take pride in our products and fully stand behind them.

Warranty and Support

Your Warranty: All warranty claims are subject to JLab authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.

Contact Us: Reach out to us at support@jlab.com or visit jlab.com/contact.

Register Today: Visit jlab.com/register for product updates, how-to tips, and FAQs.

Pairing Your JBuds Mini

1. Remove the pull tab from the charging case and close the case door with the earbuds inside. [Image: JLab earbuds inside the charging case with the lid closed.]
2. The light on the case indicates charge status. Remove the earbuds from the case. [Image: Charging case with a light indicating charge status, and then the earbuds removed from the case.]
3. One earbud will blink blue/white, indicating it is ready to pair. [Image: Two earbuds. One earbud is shown with a blinking blue and white light, indicating it's ready to pair.]
4. On your device, select "JLab JBuds Mini" in your Bluetooth settings to connect. [Image: Smartphone screen with Bluetooth settings open. 'JLab JBuds Mini' is selected, and a 'Connected' status is indicated.]

A voice prompt "Bluetooth connected" followed by the lights turning off will indicate a successful connection.

Customize your JBuds Mini features with the JLab App. Download it from the App Store or Google Play.

Earbud Controls

Use the buttons on the earbuds to control your music, calls, and device.

Call Controls (Either Earbud)

• Answer Call: [1x tap]
• Hang Up Call: [2x tap]
• Reject Incoming Call: [Press Hold]

Charging Your JBuds Mini

Charging the Case

Connect the JBuds Mini charging case to a computer or a USB 5V 1A (or less) output device using the provided cable.

Charging Indicator: The case light will pulse blue while charging.

Fully Charged Indicator: The case light will turn solid blue when fully charged.

Charging the Earbuds

Place the earbuds into the charging case. They will automatically power on and connect when removed.

Earbud Charging Indicators:

• Solid Blue: Case has 100-30% charge.
• Blinks 4x Red: Case has less than 30% charge (indicates the case needs charging).

Equalizer Modes

Tailor your audio experience with different EQ presets:

"JLab SIGNATURE"

JLab C3™ signature sound with amplified vocals and bass. Best for Pop, rock, country, electronic, and more.

"BASS BOOST"

Amplified bass and sub-bass. Best for workouts, sports, Hip hop, rap, and electronic music.

"BALANCED"

Even sound with no additional sound enhancements. Best for Podcasts, Audiobooks, and Classical music.

"CUSTOM"

Personalize your EQ settings through the JLab App.

Multipoint Connection

Connect your JBuds Mini to two devices simultaneously.

1. Once the FIRST device is connected, turn off Bluetooth on that device. The JBuds Mini will automatically enter Bluetooth pairing mode.
2. On your SECOND device, go to Bluetooth settings and connect to "JLab JBuds Mini".
3. On your FIRST device, turn Bluetooth back on and connect to "JLab JBuds Mini".

Finding Your Fit and Quick Tips

Fit: Try all included ear tips to find the best fit and ensure a proper seal for optimal audio quality. [Image: Various ear tips shown.]

Microphone: Do not cover the microphone by your ear, as this can make voice calls inaudible. [Image: Earbud placement highlighting the microphone area.]

Quick Tips:

• The left or right earbud can be used independently for music and phone calls. Simply choose one and take it out of the case to connect.
• Ensure earbuds are fully dry before placing them in the charging case to avoid any damage to the case. The earbuds are sweat/water resistant, but the case is not.
• Selecting the correct ear tip significantly improves audio quality due to a better seal for the driver.

Warning: Fully dry off the earbuds before putting them in the charging case to avoid any damage to the case. The earbuds are sweat/water resistant, but the case is not.

Troubleshooting: Connection Failure or Earbuds Disconnected

Manual Reset Procedure:

1. Keep both earbuds in the charging case. On your Bluetooth device settings, "forget" or unpair "JLab JBuds Mini".
2. Quickly tap the touch sensor on ONE earbud 7 times while it is in the charging case. The earbud light will blink blue 4 times.
3. Quickly tap the touch sensor on the OTHER earbud 7 times while it is in the charging case. That earbud light will also blink blue 4 times.
4. Take both earbuds out of the charging case. One earbud should be solid white, and the other should blink blue/white, indicating they are ready to pair to your device.

For instructional videos, visit JLAB.COM/MANUALS.

Download the JLab App

Customize your JBuds Mini features and update the latest software by downloading the JLab App from the Apple App Store or Google Play Store.

Scan the QR code to download. [Image: QR code and app store logos.]

About This Document

This document was originally produced and published by the manufacturer, JLab, and was retrieved from their official website. Tehnoteka does not assume responsibility for the accuracy, completeness, or reliability of the information, data, opinions, advice, or statements contained herein. Tehnoteka has no authorization to make any changes or additions to this document and is therefore not responsible for any errors, omissions, or inaccuracies that may be present. Tehnoteka is not liable for any damage caused to users from the use of inaccurate data.

For the latest information on pricing, available promotions, and technical specifications of the product mentioned in this document, please visit our page by clicking the following link: https://tehnoteka.rs/p/jlab-slusalice-jbuds-mini-tws-black-akcija-cena/