JLab JBuds Mini TWS Pink Wireless Earbuds

Introduction & Support

We love that you are rocking JLab! We take pride in our products and fully stand behind them.

Warranty Information

All warranty claims are subject to JLab authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.

Contact Us

Reach out to support@jlab.com or visit jlab.com/contact.

Register Your Product

Register your product at jlab.com/register for product updates, how-to tips, and FAQs.

Pairing Your JBuds Mini

1. Remove the pull tab from the charging case and close the case door with the earbuds inside.
2. The light on the case indicates charge. Remove the earbuds from the case.
3. One earbud will blink blue/white, indicating it is ready to pair.
4. On your device, go to Bluetooth settings and select "JLab JBuds Mini" to connect.

A voice prompt "Bluetooth connected" followed by the lights turning off will indicate a successful connection.

Charging Your JBuds Mini

Charging the Case

Connect the JBuds Mini case to a computer or USB 5V 1A (or less) output device. The charging light will pulse blue, and turn solid blue when fully charged.

Charging the Earbuds

Place the earbuds in the charging case. Earbuds will automatically power on and connect when removed from the case.

Case Charge Indicators:

• Solid Blue: Case 100-30% charge.
• Blinks 4x Red: Case less than 30% charge (needs charging).

Button Controls

Left Earbud Controls:

• Volume Down: 1x press
• Voice Assistant: 2x press
• Music/Movie Mode: Press and hold
• EQ Change: 3x press

Right Earbud Controls:

• Volume Up: 1x press
• Play/Pause: 2x press
• Track Forward: Press and hold
• Be Aware Mode: 3x press

Call Controls (Both Earbuds:

• Answer Call: 1x press
• Hang Up Call: 2x press
• Reject Incoming Call: Press and hold

Sound Customization (Equalizer Modes)

Customize your EQ through the JLab App.

• "JLab SIGNATURE": JLab C3™ signature sound with amplified vocals and bass. Best for Pop, rock, country, electronic, and more.
• "BASS BOOST": Amplified bass and sub-bass. Best for working out, sport, and fitness Hip hop, rap, electronic.
• "BALANCED": Even sound with no additional sound enhancements. Best for Podcasts, Audiobooks, Classical music.
• "CUSTOM": Personalize your EQ through the JLab App.

Multipoint Connection

1. Once the first device is connected, turn off Bluetooth in that device's settings. The JBuds Mini will automatically enter Bluetooth Pairing mode.
2. On your second device, go to Bluetooth settings and connect to "JLab JBuds Mini".
3. Go back to your first device's Bluetooth settings, turn on Bluetooth, and reconnect to "JLab JBuds Mini".

Finding Your Fit

Try all included ear tips to find the best fit and proper seal for optimal audio quality and comfort.

Microphone: Do not cover the microphone by the ear, as voice calls will become inaudible.

Quick Tips & Warnings

• The left or right earbud can be used independently for music and phone calls. Simply choose one and take it out of the case to connect.
• Fully dry off the earbuds before placing them in the charging case to avoid any damage to the case. The earbuds are sweat/water resistant, but the case is not.
• Choosing the correct ear tip significantly improves audio quality due to a proper seal for the driver. Try all ear tips for best results.

WARNING: Fully dry off the earbuds before putting them in the charging case to avoid any damage to the case. The earbuds are sweat/water resistant, but the case is not.

Troubleshooting (Manual Reset)

If experiencing connection failure or earbuds disconnected from each other:

1. Keep the earbuds in the charging case and "forget" "JLab JBuds Mini" from your Bluetooth device settings.
2. Quick tap 7 times on one earbud while it is in the charging case. The earbud will blink blue 4 times.
3. Quick tap 7 times on the other earbud while it is in the charging case. The earbud will blink blue 4 times.
4. Take both earbuds out of the charging case. One earbud will be solid white, and the other will blink blue/white, indicating it is ready to pair to your device.

For instructional videos, visit: JLAB.COM/MANUALS

Download the JLab App

Customize JBuds Mini features and update the latest software by downloading the JLab App from the Apple App Store or Google Play Store.

Scan QR code to download the JLab App.

Document Origin

This document was originally produced by JLab and sourced from their official website. Tehnoteka provides this information for comparison and characteristics of consumer electronics but does not assume responsibility for accuracy or completeness.