? Pairing
- Remove the pull tab. Close the lid of the case with the earbuds inside.
- Select "JLab JBuds Mini" in your Bluetooth settings to connect.
- The illuminated light on the case indicates charge. Remove the earbuds from the case.
- One earbud flashes blue/white = ready to pair.
- The voice prompt "Bluetooth connected" followed by the lights turning off will indicate connection.
⏯️ Controls: Press the Button
Left Earbud
- Volume Down: 1x press
- Voice Assistant ?️: 2x press
- Music ?/Movie ? Mode: Press "Hold"
- Change EQ ?️: 3x press
- Answer Call ?: 1x press
- Hang Up Call ?: 2x press
- Reject Incoming Call ?: Press "Hold"
Right Earbud
- Volume Up ?: 1x press
- Play/Pause ⏯️: 2x press
- Track Forward ➡️: Press "Hold"
- Note: 3x press
- Answer Call ?: 1x press
- Hang Up Call ?: 2x press
- Reject Incoming Call ?: Press "Hold"
? Charging the Case
Connect the JBuds Mini to a computer or a USB 5V 1A (or less) output device.
- Charging: Pulsing blue light
- Fully Charged: Solid blue light
? Charging the Earbuds
- Place earbuds in the case.
- The earbuds will power on and connect automatically when removed.
Case Indicator Lights:
- Solid Blue: Case 100-30% charged
- Flashes Red 4 times: Case below 30% charged (charging case)
? EQ Sound Modes: The Right Sound for Every Moment
- ✨ JLab SIGNATURE: Characteristic JLab C3™ sound with amplified vocals and bass. BEST FOR: Most music (Pop, rock, country, electronic, and more).
- ? BASS BOOST: Amplified bass and sub-bass. BEST FOR: Workout, sport, hip hop fitness, rap, electronic.
- ⚖️ BALANCED: Uniform sound without additional sound enhancements. BEST FOR: Podcasts, audiobooks, classical music.
- ⚙️ CUSTOM: Personalize your equalizer through the JLab app.
? Multipoint Connection
- Once the FIRST device is connected, turn off Bluetooth in the device settings. The JBuds Mini will automatically enter Bluetooth pairing mode.
- Enter your SECOND device's Bluetooth settings and connect to JBuds Mini.
- Enter your FIRST device's Bluetooth settings. Turn on Bluetooth and connect to JBuds Mini.
? Find Your Fit
Try all ear tips for a better fit and proper seal.
? Quick Tips
- Either the left or right earbud can be used independently for music and phone calls. Simply choose one and remove it from the case to connect.
- Completely dry the earbuds before placing them in the charging case to avoid damage to the case. The earbuds are sweat/water resistant, but the case is not.
- Choosing the correct earbud significantly improves audio quality due to proper sealing for the driver. Try all ear tips for best results.
⚠️ Warning
Completely dry the earbuds before placing them in the charging case to avoid any damage to the case. The earbuds are sweat/water resistant but the case is not.
?️ Troubleshooting: Connection Failure or Disconnected Earbuds (Manual Reset)
- Keep the earbuds in the charging case and delete "JLab JBuds Mini" from your device's Bluetooth settings.
- Tap one earbud 7 times quickly in the charging case. The earbud will flash blue 4 times.
- Tap the other earbud 7 times quickly in the charging case. The earbud will flash blue 4 times.
- Remove both earbuds from the charging case. One earbud will be solid white and the other will flash blue/white, indicating it is ready to pair with your device.
Instructional videos at: intl.jlab.com/manuals.
? Download the App
Customize JBuds Mini functions and update to the latest software. Download the JLab app on Apple/Google Play Store.
