Important Notices
Please ensure all parts are present and in good condition before assembly. Assemble on a soft surface to prevent scratching. Periodic tightening may be required. For assistance, email customersupport@safavieh.com.
Preparation
Before starting, verify all parts against the part and hardware lists. If any part is missing or damaged, do not proceed with assembly. Estimated Assembly Time: 10 minutes. Tools Required for Assembly: None (included).
Care and Maintenance
Apply adhesive felt pads to furniture areas that contact flooring to prevent damage. Use non-abrasive material for objects placed on furniture to protect the wood finish. Avoid plastic and rubber objects that may discolor or damage surfaces. Wipe up spills immediately. Clean with a soft, lint-free cotton cloth dampened with water or furniture polish. For heavily used surfaces, apply a quality paste wax regularly for added protection against scratches and spills. Frequency of wax application depends on usage.
Part List
| Piece | Description | Quantity |
|---|---|---|
| A | BACK REST | 1X |
| B | LEFT LEG FRAME | 1X |
| C | RIGHT LEG FRAME | 1X |
| D | FRONT STRETCHER | 1X |
| E | BACK STRETCHER (HOLE) | 1X |
Hardware List
| Piece | Description | Quantity |
|---|---|---|
| HW1 | JCBC BOLT M6 X 50MM | 2X |
| HW2 | BARREL NUT M6 X 13MM | 2X |
| HW3 | SCREW M7 X 35MM | 6X |
| HW4 | ALLEN WRENCH M4 | 1X |
| HW5 | WOOD PLUG | 4X |
Assembly Instructions
Step 1
Attach the Front Stretcher (D) and Back Stretcher (Hole) (E) to the Leg Frames (B & C). Insert Barrel Nut (HW2) into the designated holes on the Back Stretcher (Hole) (E). Then, connect the Back Stretcher (Hole) (E) using JCBC Bolts (HW1), aligning them with the Barrel Nut (HW2). Use the Allen Wrench (HW4) for this step. Do not tighten fully yet.
Step 2
Position the assembled frame into the bottom of the chair seat. Align the frame and tighten the bolts on the chair seat and frame using Screw (HW3) and the Allen Wrench (HW4). Ensure all screws from Step 1 and Step 2 are now tightened securely.
Step 3
Insert Wood Plugs (HW5) into the holes on the stretcher to cover the screw heads.
Step 4
Before using the chair, confirm that all screws are securely tightened.
Safety Warnings
Weight Capacity: 225 LBS
WARNING: DO NOT STAND ON CHAIR
WARNING: DO NOT ROCK BACK AND FORTH OR SIDE TO SIDE ON CHAIR
