Safavieh PAT7008 Outdoor Chair Assembly and Care
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with a small brush or vacuum.
Spills should be taken care of immediately before they harden or stain, with a slightly dampened sponge.
NOTICE
- Please make sure that you have all parts indicated before you begin assembly of this item.
- This item should be assembled on a soft surface to prevent scratching the finish during assembly.
- This item may require periodic tightening.
Product Information
Brand: Safavieh
Model #: PAT7008
Product Dimensions: 23.23" W x 26.38" D x 32.48" H
Weight Capacity: 275 lbs
Warning: Do not stand on chair.
Warning: Do not over torque bolts / screws. ⚠️
Part List and Hardware List
| PIECE | DESCRIPTION | PICTURE | QUANTITY |
|---|---|---|---|
| A | Leg Frame | [image of leg frame] | 2X |
| B | Seat Frame | [image of seat frame] | 1X |
| C | Back frame | [image of back frame] | 1X |
| D | Screw -1 (M6X80) | [image of M6X80 screw] | 2X |
| E | Screw -1 (M6X60) | [image of M6X60 screw] | 6X |
| H1 | Allen key (LG5) | [image of Allen key] | 1X |
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
Assembly Steps
Step 1
Attach leg frame (A) to back frame (C), use screws-1 (D), tighten with allen key (H1). Use screw -1 (E) to connect leg frame (A) with seat frame (B), tighten with allen key (H1).
Diagram Description: Two leg frames (A) are shown being attached to the back frame (C) using screws (D). Subsequently, the leg frames (A) are connected to the seat frame (B) using screws (E). The allen key (H1) is depicted for tightening all connections.
Step 2
Tighten screw- 1 (E) with allen key (H1) to attach back frame (C).
Diagram Description: The back frame (C) is shown being secured to the partially assembled structure using screws (E), with the allen key (H1) used for tightening.
