STI Stopper® Station Shield
POLYCARBONATE PROTECTION
Product Overview
This inexpensive and highly durable cover is designed to mount directly onto the STI Stopper® Station series of buttons. With two tabs that snap into the Stopper Station, the cover easily mounts over the push button. It withstands hard knocks while protecting the button against vandalism, damage, or accidental activation.
Backed by a Three Year Guarantee
As with all STI protective covers, this Stopper Station Shield is backed by a three-year guarantee against breakage in normal use. It is also highly cost-effective and easy to install.
Key Features
General Information
- Protects against vandalism, damage, and accidental activation.
- Features a raised, molded "LIFT HERE" indicator.
- Includes a three-year guarantee against breakage of the polycarbonate in normal use (one year on electro-mechanical and electronic components).
Design
- Cover is specifically designed to fit STI Stopper Stations with notched mounting slots.
Construction
- Cover is molded from thick, tough polycarbonate material.
- Cover is UV-stabilized.
Installation
- Ideal for use when space is limited.
- Tabs snap into the Stopper Station shell, allowing for fast and easy installation.
- Polycarbonate is rated for temperatures from -40°F to 120°F (-40°C to 49°C).
Electronics
- STI-6517A: Features a selectable 65 or 85 dB alert when lifted.
- STI-6517B: Wireless model with a selectable 65 or 85 dB alert when lifted.
- STI-6517C: Sends a wireless signal when the cover is lifted or the button is pressed.
- STI-6517D: Sounds a 65 or 85 dB alert and sends a wireless signal when the button is pressed.
Options
- Available with an alert, or with both an alert and wireless capabilities.
- Standard French and Spanish labels are available.
Dimensions and Technical Information
Models Available
- STI-6517: Stopper Station Shield
- STI-6517A: Stopper Station Shield with sound
- STI-6517B*: Wireless Stopper Station Shield with sound
- STI-6517C*: Stopper Station Shield with Wireless Transmitter
- STI-6517D*: Stopper Station Shield with Button Sound and Transmitter
- STI-6517-FR: Shield with "LEVEZ ICI" (French label)
- STI-6517-ES: Shield with "LEVANTE AQUI" (Spanish label)
*Requires STI-V34104 4-Channel Voice Receiver.
Accessories
- KIT-E02111PCB: Stopper Station Shield Piezo Sounder
- STI-34066-B: Stopper Station Horn and Transmitter
- STI-34066-C: Stopper Station Transmitter
- STI-34066-D: Stopper Station Horn and Transmitter
NOTE: Special order. Please contact STI sales for ordering information.
Approvals & Warranty
- Testing: UL and cUL S7255, ADA Compliant, FCC & IC Compliant (for STI-6517B).
- Warranty: Three-year guarantee against breakage of polycarbonate in normal use.
Diagrams and Dimensions
Visual Description of Shield and Mounting:
The STI Stopper Station Shield is a clear polycarbonate cover designed to protect emergency buttons.
The shield itself is molded from thick, tough, UV-stabilized polycarbonate. It features a raised, molded text indicator that reads "LIFT HERE" ?. The shield attaches to the Stopper Station shell via two pivot points located on its upper edge. These pivots slot into corresponding notched mounting points on the Stopper Station shell, allowing for quick and easy installation. The shield covers the emergency button, such as a red button labeled "EXIT" and "PUSH", protecting it from damage and misuse.
Dimensions:
- Shield Height: 5.32 inches (135mm)
- Shield Width: 4.84 inches (123mm)
- Shield Depth/Projection: 3.51 inches (89mm)
- Mounting Tab Depth: 1.76 inches (45mm)
Technical Diagram Components:
The diagrams illustrate the Stopper Station Shield, its shield pivot, and shell mounting slots. They show how the shield connects to the Stopper Station shell, which has specific notched slots designed to receive the shield's pivots. The Stopper Station contact assembly is also shown, along with a screw used for securing components. The STI-6517A and STI-6517B models are specifically referenced in relation to the shell mounting slots and screw.
