ActiveShop Pedicure Chair with Massager 308

Product Description

The cosmetic chair is equipped with a foot massager (bowl-shaped), making it ideal for pedicure treatments. When turned on, the massager vibrates, generating bubbles. Additionally, the massager bowl has an opening where various manipulators can be inserted to enhance the treatment's effect.

Important Safety Information

Attention! Children and inexperienced individuals should not use this device. Children must be supervised and should not play near the chair.

Before using the cosmetic chair, read the instructions and perform the following:

1. Ensure all packaging materials have been removed.
2. Ensure the chair is functional.
3. Position the chair in the area where it will be used.

Unit Dimensions

Maximum chair load: 130 kg.

Dimensions:

• Headrest: 17 cm height
• Backrest height (from seat): 74 cm
• Seat width: 48 cm
• Armrest width: 42 cm
• Footrest width: 31 cm
• Footrest depth: 15 cm
• Base length: 126 cm
• Footrest height adjustment: min 40 cm, max 60 cm
• Seat height adjustment: 44 cm to 55 cm
• Base width: 53 cm

Device Functions

1. Footrest Adjustment

The chair features a footrest that can be easily adjusted using the knob at the bottom. To lower or raise the footrest, unscrew the knob, set the footrest to the desired height, and then tighten the knob. The footrest can also be tilted left or right for maximum comfort during the treatment.

2. Chair Height Adjustment

The seat height can be adjusted using the actuator located under the seat. Pulling the actuator lowers or raises the seat to the desired position. The seat height is adjustable from 44 to 55 cm. Additionally, the chair seat rotates 360°.

3. Massager Functions

The unit is equipped with a bowl-shaped foot massager that can be easily removed and mounted. The massager is adjustable via a knob and offers various modes. To select a mode, turn the selector to the appropriate setting.

Attention! Do not turn on the massager without water.

Massage Modes:

• Vibration
• Bubbles with water heating
• Vibration-bubble with infrared and water heating

A knob set to 0 means the massager is off.

Instructions for Use

1. Position the chair in the treatment area.
2. Fill the basin with water, not exceeding the maximum liquid level.
3. Connect the device to the power supply.
4. Select the appropriate operating mode by turning the knob.
5. At the end of the treatment, return the knob to position 0 and disconnect the device from the power supply.
6. Empty the water from the basin. Do not leave water in the basin for extended periods to avoid damaging the appliance.

Cleaning and Disinfection of the Appliance

• Do not use products containing paraffin, alcohol, ammonia, or other corrosive agents for cleaning.
• Disconnect the unit before cleaning.
• To maintain the chair's surface in good condition, clean it regularly. Remember to clean and disinfect the chair after each use. Thorough disinfection once a month is recommended.

I. Metal and Plastic Surfaces

Wipe metal and plastic surfaces with a damp cloth. A small brush is useful for cleaning hard-to-reach areas or corners. Do not use excessive liquid for cleaning. Disinfect the appliance with a suitable liquid.

II. Stainless Steel Surfaces

Cleaning is best done with a mild detergent solution. Avoid chlorine-based solutions.

III. Painted or Chrome-Plated Metal Surfaces

• Do not use water jets (showers, high-pressure washers) for cleaning.
• Do not clean in high temperatures and humidity, and do not expose the unit to conditions that could cause liquid contamination.
• Do not use solvents or acids for cleaning.

IV. Chair Surface

Wipe the seat surface evenly with a special leather cleaner, then wipe with a soft, clean cloth.

Maintenance

Disconnect the unit before performing maintenance.

• Repairs must be carried out by personnel experienced and authorized by the manufacturer.
• Repairs performed by unauthorized personnel may cause personal injury or damage to the appliance for which the manufacturer is not responsible.
• Use only original spare parts approved by the manufacturer.
• Do not use the cosmetic chair or accessories if they are not functioning correctly.
• All maintenance and repair work must be documented.

Maintenance Measures

• Check controls and their wiring weekly. Check the condition and operation of the following elements at least every six months:
  • Power cord and its connection
  • Motor wiring
  • Control box and its wiring
  • Are accessories secured?
  • Normal operation of the locking system

If defects are found, stop using the equipment and contact an authorized service center. Only experienced or authorized personnel can open or replace the actuator/control unit. If any part of the equipment is damaged, disconnect the power cord and stop using it. Notify the service department.

SAFETY MEASURES

1. The appliance is professional equipment intended for use in beauty salons. Use by qualified aesthetic personnel only prevents undesirable consequences during treatment.
2. The appliance must not be disassembled or used for purposes other than those indicated in these instructions for use. All maintenance and repair work must be performed exclusively by an authorized technician (ACTIVESHOP Sp. z o.o.).
3. Do not install or use the appliance near liquids, in damp places, or with wet hands to prevent liquids from entering the appliance.
4. Immediately disconnect the appliance from the power outlet and contact the authorized service center of ACTIVESHOP Sp. z o.o. in the following cases:
   • The appliance emits a strange odor, smokes, or makes strange noises.
   • The power cord has been damaged.
   • The appliance has been overturned or its casing has been damaged.
5. Do not place objects on the cables. Do not install the appliance where someone might step on the power cord.
6. For safety, remove the power cord from the outlet each time you finish working with the appliance.
7. Do not insert anything into the appliance opening. If a foreign object enters the opening, remove the cord from the outlet and contact the distributor or manufacturer.
8. Do not place the appliance on an unstable trolley, shelf, or vehicle. The appliance may be damaged if it falls.
9. To ensure a fixed service life of the appliance, it is recommended to maintain a one-minute interval before pressing the power button again (between switching on and off and vice versa).
10. The power supply must comply with the specifications on the nameplate. Otherwise, there is a risk of malfunction, damage, or even burning of the appliance.

ATTENTION:

1. In case of damage to the power cord or other malfunctions, contact an authorized service center to avoid hazards.
2. This appliance can be used by children aged at least 8 years and by persons with reduced physical, sensory, or mental capabilities and lack of experience and knowledge, provided that supervision or instruction on the safe use of the appliance is provided, so as to understand the associated risks.
3. The equipment is not intended for use by children. Do not allow children to play with the appliance.
4. Do not leave the appliance unattended near children or persons not sufficiently informed about its use.
5. This electrical appliance is not a toy. Improper use or contact with an electrical appliance can pose a health risk or cause death; therefore, the appliance must be used and stored out of reach of children.

APPLIANCE DISPOSAL

Dispose of used electrical appliances, devices, and packaging at recycling centers in compliance with environmental protection principles. Electrical appliances must not be disposed of in domestic waste containers. Follow the rules for the disposal of such appliances.

In order to protect the environment in accordance with Directive 2012/19/CE on waste electrical and electronic equipment, used electrical equipment must be collected separately and handed over to collection points for waste electrical and electronic equipment. At the end of their useful life, old appliances contain fully recyclable components and must therefore be handed over for reprocessing. They must therefore be delivered to appropriate collection points, as well as to ACTIVESHOP Ltd.

STORAGE AND TRANSPORT

The appliance must be transported at temperatures between (-) 20°C and (+) 50°C only in its original packaging. Store the appliance in a well-ventilated place with a relative humidity not exceeding 75%. Operating temperature between (+) 10°C and (+) 40°C. During storage and transport, the device must not be thrown or dropped, nor exposed to mechanical shocks or weather conditions.