Tribesigns YS0123 Corner Boss Table Assembly Instructions

Assembly Steps

Step 1:

Attach parts 1 and 2 using hardware A (x6).

Attach part 22 to part 2 using hardware A (x2).

Step 2:

Attach part 3 to the structure from Step 1 using hardware A (x12).

Step 3:

Attach parts 5, 6, and 7 using hardware B (x4) and hardware A (x4).

Step 4:

Attach part 4 to the structure from Step 3 using hardware A (x8).

Step 5:

Attach part 3 to the structure using hardware A (x8).

Step 6:

Connect the side panels (parts 8, 9, 10, 11) to the base structure using hardware A (x4).

Step 7:

Attach part 11 and part 9 to the structure using hardware A (x4).

Step 8:

Insert part P into part 10 and attach to the structure using hardware A (x1) and part P (x1).

Step 9:

Attach part 12 to the structure using hardware A (x8).

Step 10:

Attach part 12 to the structure using hardware A (x8).

Step 11:

Attach part 13 to the structure using hardware C (x4).

Step 12:

Attach hardware E (x16) and K (x16) to the back panels.

Step 13:

Attach part 14 (doors) using hardware D (x4), F (x2), G (x1), and E (x8).

To prevent the door hinge from falling off, please install 4 screws.

Step 14:

Attach the doors (part 14) using hardware D (x8).

Step 15:

Attach part 20 to the structure using hardware R (x2).

Step 16:

Attach part 21 to the structure using hardware R (x8).

Step 17:

Attach part 23 to the structure using hardware Q (x8).

Step 18:

Attach the legs (part 18) using hardware M (x2), I (x2), and H (x8).

Step 19:

Attach parts 15, 16, 17, 19, and 20 using hardware F (x24), P (x2), N (x2), and H (x2).

Step 20:

Attach part 19 to the structure using hardware R (x2).

Step 21:

The desk is now assembled.

Step 22:

Horizontal flip installation is the same.