Aldes ISONE 1500 Ø 400 mm Fire Damper
Model Number: 11043067
Product Overview
The ISONE 1500 with ring is part of a range of flush-mounted fire dampers, certified up to 1500 Pa and optimized for high buildings. It is designed to prevent the propagation of fire and smoke between compartments in commercial buildings, particularly in public-access and high-rise structures.
Product Benefits
- Traditional mortar seal, no attachment accessories required.
- Scalable mechanism allowing for easy insertion of all equipment by hand.
- Dual-voltage (24/48V) trip device to prevent control errors.
Principles of Operation
In its normal state, the damper remains open. In the event of a fire, it automatically closes to prevent the spread of fire and smoke into adjacent compartments. Closure can be triggered thermally or centrally via the scalable mechanism.
Product Description
The ISONE 1500 with ring is a flush-mounted fire damper suitable for ventilation systems operating at pressures between 500 Pa and 1500 Pa. It features a scalable mechanism, easy wiring through a removable terminal block, and offers multiple installation possibilities.
Installation
The ISONE 1500 can be installed in various configurations:
- Flush-mounted in a 110 mm concrete wall.
- Flush-mounted in a 150 mm concrete slab (maximum opening size of 600 x 600 mm at 1500 Pa).
- Using a traditional mortar seal.
- Opening dimensions: (X+50) x (Y+50) mm.
- The flap shaft must be oriented vertically or horizontally.
- Ensure compliance with fire resistance classification reports for installation.
Diagrammatic Representation of Installation:
[Illustration showing installation in a concrete wall, with dimensions and labels like 'Mise en oeuvre mur béton'.]
[Illustration showing installation in a concrete slab, with dimensions and labels like 'Mise en oeuvre dalle béton'.]
Main Characteristics
- Certified and compliant with NF-S-61937-5.
- CE marked according to EN 15650 (Certificate No. 1812-CPD-1016).
- Approved installation without attachment accessories for:
- EI 120 S - 1500 Pa in a 110 mm concrete wall.
- EI 120 S - 1500 Pa in a 150 mm concrete slab up to 600 x 600 mm.
- Includes a 70°C fusible link.
- Rectangular duct components are made of refractory material.
- Shells are fixed to the ends for connection to circular ducting.
- The mobile flap is made of refractory material and closes on stops.
- Features an upgradable ISONE type mechanism.
- Facilitates easy cabling via a removable terminal block.
Supplementary Characteristics
- To achieve a 125 mm diameter damper, order two RCC reducers (part number 11143575) in addition to the 160 mm damper.
- To achieve a 100 mm diameter damper, order two RCC reducers (part number 11143574) in addition to the 160 mm damper.
Dimensional Data
| Variant | A (mm) | L (mm) | Ø (mm) | Ø opening (mm) |
|---|---|---|---|---|
| 11043067 | 465 | 530 | 400 | 515 x 515 |
Diagrammatic Representation of Dimensions:
[Illustration showing the damper with dimensions labeled A, L, and Ø, and associated measurements like 108, 50.]
Regulations and Compliances
PV CE Number: 1812-CPR-1016
