Aldes ISONE 1500 Ø 160 mm Fire Damper
The ISONE 1500 with ring is part of a range of flush-mounted fire dampers, certified up to 1500 Pa and optimized for high buildings.
Product Benefits
- Traditional mortar seal, no attachment accessories required.
- Scalable mechanism: all equipment can be inserted by hand.
- Dual-voltage (24/48V) trip device: prevents control errors.
Regulations and Compliances
PV CE number: 1812-CPR-1016
Principles of Operation
The damper is open in its normal position. In case of fire, the damper closes to prevent the propagation of fire and smoke into other compartments. Its closure may be controlled thermally or centrally (scalable mechanism).
Product Description
The ISONE 1500 with ring is a flush-mounted fire damper used for the compartmentation of commercial buildings (public-access buildings, high-rise buildings, etc.). It is suited for ventilation systems operating at pressures above 500 Pa and below 1500 Pa. The range features a scalable mechanism, easy wiring using the removable terminal block, and multiple installation possibilities.
Installation
- Flush-mounted in a 110 mm concrete wall.
- Flush-mounted in a 150 mm concrete slab (max. 600 x 600 mm at 1500 Pa).
- Traditional mortar seal.
- Dimensions of opening (mm) = (X+50) x (Y+50).
- Flap shaft must be vertical or horizontal.
- Respect fire resistance classification reports for installation.
Main Characteristics
- Certified and compliant with NF-S-61937-5.
- CE marked as per EN 15650, no. 1812-CPD-1016.
- Approved installation, no attachment accessories:
- El 120 S - 1500 Pa in 110 mm concrete wall.
- El 120 S - 1500 Pa in 150 mm concrete slab up to 600 x 600 mm.
- 70°C fusible link included.
- Rectangular duct components made of refractory material.
- Shells fixed to ends for connection to circular ducting.
- Mobile flap made of refractory material, closing on stops.
- ISONE type upgradable mechanism.
- Easy cabling using the removable terminal block.
Supplementary Characteristics
- To achieve a 125 mm diameter damper, order 2 RCC reducers (11143575) in addition to the 160 mm damper.
- To achieve a 100 mm diameter damper, order 2 RCC reducers (11143574) in addition to the 160 mm damper.
Dimensional Data
| Variants | A (mm) | L (mm) | Ø (mm) | Ø opening (mm) |
|---|---|---|---|---|
| 11043062 | 265 | 415 | 160 | 315 x 315 |
Diagram showing dimensions A, L, and Ø for the ISONE 1500 damper. A is indicated as 265 mm, L as 415 mm, and Ø as 160 mm. The opening diameter is specified as 315 x 315 mm. Additional dimensions show 108 mm and 50 mm offsets.
Installation Diagrams
Diagrams illustrating installation in concrete walls and slabs. The diagrams show the damper positioned within the wall or slab structure, with annotations indicating the setup for different scenarios.
