Important Safety and Assembly Notes:
- Two or more people are recommended for assembly.
- Protect wires and remote control accessories from damage during installation.
- Professional installation is highly recommended.
- Assemble on a flat, clean, and soft surface.
Parts List
| Item No. | Reference Image | Quantity | Item No. | Reference Image | Quantity |
|---|---|---|---|---|---|
| A | [Screw] | X62 + 4 extra | J | [Screw] | X60 + 4 extra |
| B | [Cam Lock] | X62 + 4 extra | K | [Screw] | X8 |
| C | [Dowel] | X62 + 4 extra | L | [Screw] | X40 + 4 extra |
| D | [Shelf Support] | X4 | M | [Bracket] | X2 |
| E | [Screw] | X4 | N | [Screw Cover] | X45 |
| F | [Hinge] | X12 | O | [Hardware Pack] | X1 |
| G | [Hinge] | X4 | P | [Bracket] | X2 |
| H | [Screw] | X10 | Q | [Screw] | X10 |
| I | [Drawer Slide] | X2 | R | [Bracket] | X4 |
| 1 | [Top Panel] | X1 | 10 | [Side Panel] | X1 |
| 2 | [Side Panel] | X1 | 11 | [Back Panel] | X1 |
| 3 | [Side Panel] | X1 | 12 | [Top Support] | X1 |
| 4 | [Drawer Side] | X2 | 13 | [Shelf] | X1 |
| 5 | [Drawer Side] | X2 | 14 | [Shelf] | X1 |
| 6 | [Drawer Bottom] | X2 | 15 | [Shelf] | X2 |
| 7 | [Drawer Front] | X2 | 16 | [Shelf] | X1 |
| 8 | [Drawer Back] | X2 | 17 | [Shelf] | X1 |
| 9 | [Drawer Back] | X1 | 18 | [Drawer Front] | X1 |
| 19 | [Shelf] | X1 | 25 | [Shelf] | X1 |
| 20 | [Shelf] | X1 | 26 | [Shelf] | X1 |
| 21 | [Shelf] | X1 | 27 | [Door Panel] | X2 |
| 22 | [Shelf] | X1 | 28 | [Wall Mount Shelf] | X2 |
| 23 | [Shelf] | X1 | 29 | [Screw] | X2 |
| 24 | [Fireplace Insert] | X1 | 30 | [Cable Management Panel] | X1 |
Assembly Steps
Step 1
Attach shelves (20) and (21) using screws (A). Attach drawer slides (I) to shelves (20) and (21) using screws (J). Secure with cam locks (A).
Diagram shows two panels labeled 20 and two panels labeled 21. Screws (A) are inserted into pre-drilled holes. Drawer slides (I) are attached to the sides of panels 20 and 21, secured by screws (J) and cam locks (A). A 180-degree rotation symbol is shown.
Step 2
Attach shelves (23), (22), and (26) using screws (A) and dowels (C).
Diagram shows three long panels labeled 23, 22, and 26. Screws (A) and dowels (C) are inserted into the ends of these panels.
Step 3
Connect shelves (22) and (23) to panels (20) and (21) using cam locks (B).
Diagram shows panels 20, 21, 22, and 23 being joined. Cam locks (B) are used to secure the connections.
Step 4
Attach shelf (25) to panels (20) and (21) using cam locks (B). Attach shelf (26) to panel (25) using cam locks (B). Attach panels (20) and (21) to panel (25) using screws (C).
Diagram shows panels 20, 21, 25, and 26 being assembled. Cam locks (B) and screws (C) are used for connections.
Step 5
Attach shelves (13) and (14) using screws (A) and dowels (C).
Diagram shows two long shelves labeled 13 and 14. Screws (A) and dowels (C) are inserted into the ends.
Step 6
Connect shelves (13) and (14) to the main structure using cam locks (A) and (C). Rotate the structure 180 degrees. Connect shelves (13) and (14) to the main structure using cam locks (B).
Diagram shows the assembly from Step 5 being connected to the main structure using cam locks (A), (C), and (B). A 180-degree rotation symbol is shown.
Step 7
Attach shelves (13), (20), (21), and (25) using cam locks (B). Attach shelves (13), (20), (21), and (25) using screws (J) and (H).
Diagram shows the main structure with shelves 13, 20, 21, and 25 being secured with cam locks (B) and screws (J) and (H).
Step 8
Attach shelves (18), (19), (16), and (17) using screws (A) and (C). Attach shelves (18) and (19) to panels (16) and (17) using cam locks (B).
Diagram shows shelves 18, 19, 16, and 17 being assembled using screws (A), (C), and cam locks (B).
Step 9
Connect shelves (13), (20), (21), (25), (16), and (17) using cam locks (B). Secure with screws (J) and (M).
Diagram shows the assembly of multiple shelves and panels using cam locks (B) and screws (J) and (M).
Step 10
Attach shelves (2) and (3) using screws (A) and (C). Attach shelves (13), (16), (25), and (17) using cam locks (B).
Diagram shows shelves 2 and 3 being attached with screws (A) and (C), and shelves 13, 16, 25, and 17 being secured with cam locks (B).
Step 11
Attach shelves (3), (13), (17), (25), (2), and (16) using screws (H) and (J).
Diagram shows the assembly of various shelves and panels using screws (H) and (J).
Step 12
Attach drawer slides (9), (10), and (11) to shelves (13), (3), (25), (2), and (16) using cam locks (B) and (C).
Diagram shows drawer slides being attached to various panels using cam locks (B) and (C).
Step 13
Attach shelf (1) using screws (A) and (C). Attach shelves (13), (3), (25), and (2) using screws (C).
Diagram shows shelf 1 being attached with screws (A) and (C), and shelves 13, 3, 25, and 2 being secured with screws (C).
Step 14
Attach shelf (12) to shelf (1) using cam locks (B). Attach shelves (1), (13), (3), and (25) using cam locks (B).
Diagram shows shelf 12 attached to shelf 1 with cam locks (B), and shelves 1, 13, 3, and 25 secured with cam locks (B).
Step 15
Attach shelf (30) to shelf (1) using screws (H) and (J). Note: The cable hole in plate #30 should face the notch of plate #1. Fasten two screws to the leftmost and rightmost holes in plate #30.
Diagram shows shelf 30 being attached to shelf 1 with screws (H) and (J). A note specifies the orientation of the cable hole.
Step 16
Attach shelves (29) to shelves (20) and (21) using screws (L). Note: First secure the two screws into the holes on the back of plate #21 and plate #20. Attach decorative screw covers (N) for each visible eccentric wheel (B).
Diagram shows shelves 29 being attached to shelves 20 and 21 with screws (L). A note provides installation guidance. Decorative screw covers (N) are shown being placed over eccentric wheels (B).
Step 17
Thread the socket plug through the hole in plate #30.
Diagram shows a socket plug being threaded through a hole in panel 30.
Step 18
Assemble drawer components: Attach drawer sides (5) and (8) to drawer front (7) using screws (C) and (K). Attach drawer bottom (6) to the drawer sides. Attach drawer front (7) to drawer sides (4) and (5) using screws (E) and (D).
Diagrams show the assembly of drawer parts, including sides, front, and bottom, using various screws.
Step 19
Assemble drawer components: Attach drawer sides (5) and (8) to drawer front (7) using screws (A) and (C). Attach drawer bottom (6) to the drawer sides. Attach drawer front (7) to drawer sides (4) and (5) using screws (E) and (D).
Diagrams show the assembly of drawer parts, including sides, front, and bottom, using various screws.
Step 20
Insert assembled drawers into the TV stand.
Diagram shows the completed TV stand with drawers being inserted into their respective slots.
Step 21
To install the fireplace insert (detailed in the next step), do not install 4 x part F and plate #24 in the center, because then the fireplace insert cannot be installed.
Diagram shows panels 15 and 24 being positioned. A note indicates that parts F and panel 24 should not be installed in the center if the fireplace insert is to be used.
Step 22
Attach door hinges (G) to door panels (27) using screws (J). In order to ensure consistent spacing between upper and lower door joints, the lower part of the door hinge should be installed first, followed by the upper part. Adjust the distance between the cabinet door and the frame using the hinge adjustment screws.
Diagrams show door hinges (G) being attached to door panels (27) with screws (J). Instructions and diagrams illustrate how to adjust the door alignment.
Step 23
Attach doors to the TV stand using screws (D) and (E). Attach shelves (1) and (3) using screws (P) and (L).
Diagrams show doors being attached to the TV stand and shelves being secured with screws.
Step 24
Attach shelves (1) and (12) using screws (P) and (Q).
Diagrams show shelves 1 and 12 being attached using screws (P) and (Q).
Step 25
Attach wall-mounted shelves (28) to the wall using brackets (R) and screws (J). Note: Before drilling holes to the wall, confirm the position and mark the drilling locations. Special Attention: The maximum load capacity for the wall-mounted shelf is 25 lbs.
Diagrams show wall-mounted shelves (28) being attached to the wall using brackets (R) and screws (J). Instructions for drilling and load capacity are provided.
Step 26
Installation Completed.
Diagram shows the fully assembled TV stand with wall-mounted shelves.
